DISTRIBUTED EXTERNAL SURFACE HARDENING OF CAR DESIGN BY WINDING
Journal Title: Наука та прогрес транспорту - Year 2017, Vol 0, Issue 2
Abstract
Purpose. The paper involves coverage of features and results of the research conducted by the authors to determine the feasibility and establishment of pre-stressed-strained state of freight cars by winding in order to improve their strength characteristics. It is also necessary to present the theoretical justification for the effectiveness of the application of this method for car designs and an appropriate example for the tank-car. Methodology. The conducted study is based on an analysis of known works on the subject, mathematical justification and computer modeling. At the calculations of rolling stock components contemporary conventional techniques were used. Findings. Authors found that the winding method for pre-stressed-strained state is effective and appropriate for use in the construction of railway rolling stock and, in particular freight cars. Freight car designs with the pre-stressed-strained state are characterized by a number of strength advantages, among which there is an improvement of the work on the perception of operational loads and resource conservation. Originality. For the first time it is proposed the improvement of bearing capacity of freight car constructions through the creation of its component in the directed stress-strained state. It is also for the first time proposed the use of distributed external surface hardening by the method of winding to create a pre-stress-strained state of structural components of freight cars. The methods for winding designs of freight cars and their implementation were considered. Practical value. The studies developed a number of technical solutions for improving the design of freight cars and tank-container, which has been patented. Corresponding solutions for the tank-car are partially presented. Practical implementation of such solutions will significantly improve the technical, economic and operational performances of car designs.
Authors and Affiliations
O. V. Fomin, A. A. Stetsko, V. Y. Osmak
Keywords
Related Articles
- EP ID EP228662
- DOI 10.15802/stp2017/100232
- Views 76
- Downloads 0
ЗАСТОСУВАННЯ РЕЙТИНГОВИХ МОДЕЛЕЙ ТА ІНФОРМАЦІЙНИХ ТЕХНОЛОГІЙ ДЛЯ УПРАВЛІННЯ АДМІНІСТРАТИВНО-ТЕРИТОРІАЛЬНИМИ КОМПЛЕКСАМИ
Мета. У науковій роботі необхідно розглянути розвиток рейтингових моделей та відповідних інформаційних технологій, призначених для вирішення комплексу задач сфери стратегічного планування адміністративно-територіальних о...
ПОБУДОВА ПРОМІЖНОЇ ОПОРИ МОСТА ЯК ПАРАМЕТРИЧНОГО ОБ’ЄКТА ЗА ДОПОМОГОЮ AUTODESK REVIT
Мета. У науковій роботі необхідно вирішити наступні задачі: 1) дослідити можливості AutodeskRevit по створенню параметричних об’єктів; 2) створити інформаційну модель проміжної опори моста з можливістю зміни розмірів мод...
SELECTION OF RATIONAL PARAMETERS OF THE NOMINAL MODE OF ELECTRIC LOCOMOTIVES
Purpose.The railways of Ukraine have been operated the locomotives, which are both morally and physically obsolete. Therefore, to ensure the competitiveness of rail transport it is necessary to update the locomotive flee...
CONSIDERATION OF AERODYNAMIC IMPACT IN SETTING THE MAXIMUM PERMISSIBLE SPEEDS OF HIGH-SPEED TRAIN
Purpose. Studies of the effect of aerodynamic pressure on the maximum permissible speeds of a high-speed train on the existing railway infrastructure. Methodology. The study of the magnitude and direction of the aerodyna...
MODELING THE TRANSITION CURVE ON A LIMITED TERAIN
Purpose. Further development of the method of geometric modelling of transition curves, which are placed between rectilinear and circular sections of railway tracks and are created in localities, the relief of which caus...