Disturbance Analysis for Power Systems Based on LabVIEW Real-Time and Reconfigurable FPGA Modules Using Wavelet Transform
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2018, Vol 42, Issue 0
Abstract
This paper present a disturbance analysis monitoring system for the purpose of detection of disturbance analysis using Wavelet Transform (WT). The proposed system is based on the real-time capabilities of the Real-Time LabVIEW operating system and on a CompactRIO type real-time computer which contains a network of FPGA (Field Programmable Gate Array). The WT is used to analyze the quality of energy and to detect the transient phenomena characteristic of the quasi-periodic signals. The system achieves the storage of entries as TDMS (Technical Data Management Streaming) files and Word/Excel type automatic reports automatically sent by email at predefined addresses, contains an OPC UA (Open Platform Communications Unified Architecture) type server for communication with a hierarchically superior SCADA (Supervisory Control And Data Acquisition) type system, performs selective entry of the characteristic parameters into a database, contains a Webserver for Intranet/Internet access, for viewing the measured data, and for system management from anywhere, the application is connected to a Cloud-type platform. The disturbance analysis monitoring system has been tested using both simulated signals and real signals from a practical experiment.
Authors and Affiliations
Marcel Nicola, Claudiu-Ionel Nicola, Sebastian Popescu, Dumitru Sacerdotianu, Marian Duta
Keywords
Related Articles
- EP ID EP432980
- DOI -
- Views 138
- Downloads 0
SENSORLESS CONTROL OF INTERIOR PERMANENTMAGNET SYNCHRONOUS MOTOR BASED ON EXTENDED KALMAN FILTER
This paper presents a sensorless position control concept for an interior permanent magnet synchronous motor (IPMSM). Conventionally the speed of an IPMSM can be measured conveniently by d.c. tachogenerators, which are n...
EXPERIMENTAL VALIDATION OF NUMERICAL RESULTS CORESPONDING TO CATENARY CONTACT WIRE TEMPERATURE
In this paper are presented the numerical 2D, 3D and experimental results obtained for catenary contact wire heating in alternative current. 2D numerical simulations were made in QuickField Professional and 3D in ProEngi...
Smart Home Energy Management System for Peak Average Ratio Reduction
High quality demand-side management has become indispensable in the smart grid infrastructure for enhanced energy reduction and system control. Most of the demand-side management systems that existed were focusing on...
The Study of Asynchronous Motors Behavior in Artificial Load
The performances and heating of asynchronous motor are established to nominal load into a testing laboratory. Only in this way can be created real life working conditions, but there are also two big disadvantages: the ne...
Development of a Barrier Structure Actuated by Three Shape Memory Alloy Springs
In this paper, the authors present an experimental analysis in order to highlight the behavior of a barrier structure model, actuated by three shape memory alloy (SMA) helical springs. The authors have developed this new...