Dose Calibration and Track Diameter Distribution for 241Am-Be Neutron Source, Using CR-39 Nuclear Track Methodology
Journal Title: Journal of Nuclear Physics, Material Sciences, Radiation and Applications - Year 2018, Vol 6, Issue 1
Abstract
In neutron detection, the more common method is using electronic instrumentation associate with Bonner spheres, however, currently the Nuclear Tracks Methodology (NTM) is coming popular because of the simplicity, flexibility in size of the detector, no requirement for sophisticated instrumentation and installation, and low cost. In this work, a preliminary result of the dose calibration and track diameter distribution of Americium-Beryllium (241Am-Be) source using Nuclear Track Methodology is presented. As material detector, CR-39 polycarbonate, cut in 1.8 × 0.9 cm2 chips was chosen, and two step chemical etchings after neutron exposure was used to develop the tracks. The irradiations were made in environmental normal conditions, in the ORNL neutron calibration facilities. The CR-39 chips were placed in a phantom, with 3mm plastic (Lexan) sheet in between the source and detectors to increase the proton generation. The total track density and track diameter distribution was performing in a Counting and Analysis Digital Image System (CADIS), developed at the Institute of Physics of the University of Mexico UNAM. The results are compared with a standard survey instrument and energy reference spectra of the International Atomic Energy Agency (IAEA).
Authors and Affiliations
J. S. Bogard , J. I. Golzarri , G. Espinosa
Synthesis of MgB4O7:Dy3+ and Thermoluminescent Characteristics at Low Doses of Beta Radiation.
The synthesis and thermoluminescent characteristics of dysprosium-doped MgB4O7 are analyzed. The phosphor at different concentrations (0, 0.1, 0.5, 1, 2 and 4 mol%) of the dopant was prepared by the solution-assisted met...
The Dependence of Surface Diffuseness Parameter on N/Z Ratio of The Fusion of Neutron-Rich Colliding Nuclei
Surface diffuseness parameter used in Woods-Saxon form of potential have been extracted from a large number of experimentally studied neutron-rich fusion cross sections at near barrier energies. The results of our system...
Detector Geometry Simulation Using GEANT4
Neutrino oscillation is an important phenomenon to explain the massive nature of neutrinos. this quantum mechanical phenomenon can be understood as mixing in quark sector just like the one we have in lepton sector. Obser...
Determination of Cu, Zn, Mn & Fe Metals in Soil Employing the EDXRF & FAAS Techniques and Comparative Study of Results
Two analytical spectroscopic techniques viz. EDXRF and FAAS were employed in analyzing the four heavy metals i.e. Cu, Zn, Mn and Fe in 24 soil samples. The heavy metals in understudy soil were found to have very low to h...
Proposal of a Novel Setup for Linac Monitoring Using a Specifically Designed Plastic Scintillator and a Spectrophotometer
In this work, we report the design, implementation, and results of an alternative monitoring system for a linear accelerator (LINAC) used in medical therapy. The system proposed consist in as lab of scintillator plastic...