Dynamic Analysis of TCSC on Distance Protection Relay & Its Mitigation
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2015, Vol 3, Issue 7
Abstract
The basic operation principle of distance relay is based on the fact that the line impedance is fairly constant with respect to the line length. However, the implementation of FACTS controllers in power system transmission for enhancing the power system controllability and stability have introduced new power system issues in the field of power system protection that must be considered and analyzed. Some of the concerns include the rapid changes in line impedance and the transients introduced by the fault occurrence and the associated control action of the FACTS Controllers. The presence of the FACTS devices in the faulted loop introduces changes to the line parameters seen by the distance relay. The effect of FACTS device would affect both the steady state and transient characteristics of the apparent impedance seen by distance relays due to the fast response time of FACTS Controllers with respect to that of the protective devices.
Authors and Affiliations
Ms. Snusha Dharmik, Prof. Radharaman Shaha
Keywords
Related Articles
- EP ID EP21072
- DOI -
- Views 208
- Downloads 5
Inventory Management of Spare Parts in Andal Depot Eastern Railway India
although inventory management has significantly developed in the past years as a management discipline, its application is still minimal in the service industry and government. In contrast, it is an important tool for a...
Seed Dormancy and Effect of Salinity on Germination of Citrullus Colocynthis L
Citrullus colocynthis L. has been garnering interest in recent times as a potential biodiesel feedstock crop due to its high seed oil content (up to 50%). There have been reports of seed dormancy in this crop, which can...
Biometric Recognition Technique for ATM System
In 1930's, Mr. Luther G. Simijian initiated building first of kind and not so successful version of Tellering machine. He did register related patents. He initially came up with an idea of machine fixed in a wall called...
A Review on Effects of GTAW Process Parameters on weld
Different process parameters of Gas Tungsten Arc Welding (GTAW) affects the weldment quality. Increasing welding current increases the deposition rate and reduces the hardness. Direct current electrode negative (DCEN) p...
Ergonomics Design and Work Stress Output on Lever Type Borehole Mechanical Hand Pump
The use of lever type borehole handpumps (Indian Mark II and Afridev (RUWATSAN)) were found to impose undue fatigue and stress on the users. This leads to discomfort, and easily could lead to repetitive strain injury (R...