Dynamic buckling of embedded laminated nanocomposite plates based on sinusoidal shear deformation theory
Journal Title: Journal of Applied and Computational Mechanics - Year 2016, Vol 2, Issue 4
Abstract
In this study, dynamic buckling of embedded laminated nanocomposite plates is investigated. The plates are reinforced with single-walled carbon nanotubes (SWCNTs) where to obtain the equivalent material properties of them, Mori-Tanaka model is applied. Based on the sinusoidal shear deformation theory (SSDT), the motion equations are derived using energy method and Hamilton's principal. The Navier’s method in conjunction with the Bolotin's method is used for obtaining the dynamic instability region (DIR) of the structure. The effects of different parameters such as volume percent of SWCNTs, number and orientation angle of layers, elastic medium and geometrical parameters of plates are shown on the DIR of the structure. Results indicate that increasing volume percent of SWCNTs increases the resonance frequency and shifts the DIR to right. Also, it is found that the present results have good agreement with previous researches.
Authors and Affiliations
Mohammd Sharif Zarei, Mohammad Hadi Hajmohammad, Ali Nouri
Keywords
Related Articles
- EP ID EP178299
- DOI 10.22055/jacm.2016.12545
- Views 58
- Downloads 0
Buckling Analysis of a Micro Composite Plate with Nano Coating Based on the Modified Couple Stress Theory
The present study investigates the buckling of a thick sandwich plate under the biaxial non-uniform compression using the modified couple stress theory with various boundary conditions. For this purpose, the top and bott...
Jeffery Hamel Flow of a non-Newtonian Fluid
This paper presents the Jeffery Hamel flow of a non-Newtonian fluid namely Casson fluid. Suitable similarity transform is applied to reduce governing nonlinear partial differential equations to a much simpler ordinary di...
Deflection of a hyperbolic shear deformable microbeam under a concentrated load
Deflection analysis of a simply supported microbeam subjected to a concentrated load at the middle is investigated on the basis of a shear deformable beam theory and non-classical theory. Effects of shear deformation and...
Saint-Venant torsion of non-homogeneous anisotropic bars
The BEM is applied to the solution of the torsion problem of non-homogeneous anisotropic non-circular prismatic bars. The problem is formulated in terms of the warping function. This formulation leads to a second order p...
Investigation of the vdW Force-Induced Instability in Nano-scale Actuators Fabricated form Cylindrical Nanowires
The presence of van der Waals (vdW) force can lead to mechanical instability in freestanding nano-scale actuators. Most of the previous researches in this area have exclusively focused on modeling the instability in actu...