Dynamic Inspection Technology of Tunnel Deformation Based on Onboard LIDAR
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 6
Abstract
Objective In view of the poor real-time performance, high cost and low efficiency of tunnel deformation monitoring methods in China, it is necessary to effectively improve the efficiency of tunnel deformation monitoring. Hence, a monitoring and measuring method of tunnel deformation based on onboard LIDAR (light laser detection & ranging) is proposed. Method The LIDAR sensor is used to scan and collect the three dimensional data of the whole tunnel section, and the total least squares is used to adjust the cloud data of the tunnel points and fit the surface. The deformation of tunnel section is analyzed according to the fitted ellipse parameters to realize rapid dynamic inspection of the tunnel deformation. Result & Conclusion The experimental results show that with this method the tunnel full section data can be obtained quickly and accurately. The tunnel deformation condition can be effectively obtained through the data processing and analysis with total least squares, basically realizing the dynamic real-time monitoring of the tunnel deformation without affecting the normal traffic in the tunnel.
Authors and Affiliations
Yuanxin TAN, Runhua GUO, Pengcheng SHI
Keywords
Related Articles
- EP ID EP737779
- DOI 10.16037/j.1007-869x.2024.06.050
- Views 43
- Downloads 0
Research on Modal Enhancement of EMU Vehicle Carbody Structure Based on Sensitivity Analysis
Objective To comprehensively understand the influence of carbody component dimensions on carbody modal characteristics, a sensitivity analysis of EMU (electric multiple units) body modal is conducted to enhance the main...
Protection Measures for Shield Tunneling Closely Under-passing Operating Metro Tunnels in Water-rich Soft Soil Area
［Objective］ In water-rich soft soil areas, it is difficult to control the deformation of the existing operating metro tunnel structure caused by the construction of the shield tunneling closely under-passing. Therefore...
Harmonic Analysis of Superconducting and Suspension Magnetic Fields in Superconducting Maglev Trains
［Objective］ During the operation of superconducting maglev trains, factors such as inconsistencies in ground coil alignment and large electromagnetic air gaps often generate significant high-order higher harmonics in t...
Integrated Design of Station Electromechanical Equipment Monitoring System Based on Edge Control Logic
Objective The current urban rail transit management mode still predominantly manages lines as subjects, and the efficiency of networked management is not fully utilized. Enhancing the efficiency and effectiveness of urba...
Emergency Disaster Prevention Design for Large Urban Rail Transit Transfer Station
[Objective] In view of the increasing number of large-scale transfer stations in urban rail transit, which are characterized by deep burial depth, intensive personnel, limited escape and rescue sites, the difficulty and...