DYNAMIC PROCESS MODELING AND SIMULATION OF SHELL-AND-TUBE HEAT EXCHANGER
Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1
Abstract
Heat exchangers are commonly used to exchange heat in industrial production. According to the law of energy conservation, the characteristics of shell-and-tube heat exchanger were analyzed and the dynamic model was established. The dynamic model can effectively simulate the change of outlet temperature of cold stream with the change of flowrate and inlet temperature of hot stream. The relationship curves of the dynamic model between temperature, flowrate and time were obtained through simulation experiments. By using the simulation results the heat transfer process of heat exchanger can be analyzed comprehensively, which provides a theoretical basis for the control and optimization of heat transfer process in engineering practice
Authors and Affiliations
Wang Xing, Tian Ao, Cao Yubo, Xue Tianfu, Yang Ying
Keywords
Related Articles
- EP ID EP414798
- DOI 10.26480/icnmim.01.2018.306.308
- Views 69
- Downloads 0
POROUS GRAPHENE-MANGANESE DIOXIDE NANOWIRES COMPOSITE FILM FOR HIGH VOLUMETRIC PERFORMANCE SUPERCAPACITORS
We report a novel strategy to prepare densely packed porous graphene and MnO2 nanowires composite film (PGNs-MnO2 NWs) through graphene etching process, hydrothermal method and subsequent vacuum-assisted filtration metho...
A STUDY FOR COMPOUND RARE EARTH CHEMICAL TREATMENT LIQUID BASED ON BRASS SURFACE
In this paper, the optimum technological conditions of brass composite rare earth chemical treatment liquid were obtained by orthogonal test. The process conditions for chemical degreasing, chemical polishing and picklin...
SEPARATION OF DIISO-PROPYL ETHER+ISO-PROPANOL+N-PROPANOL BY EXTRACTIVE DISTILLATION AND PRESSURE-SWING DISTILLATION: SIMULATION AND ECONOMIC OPTIMIZATION
We have studied, simulated and evaluated economically two separation alternatives of a ternary mixture made up of 25 mol% diisopropyl ether, 60 mol% isopropyl alcohol and 15 mol% n-propyl alcohol by means of a practical...
PREPARATION AND CHARACTERIZATION OF CATALYST FOR REDUCTION AMINATION OF ETHANOLAMINE BY DIFFERENT METHOD
The NiO-CuO-CaO/Al2O3 composite oxide catalyst was prepared by impregnation method, CO-precipitation method and grinding microwave method with Al2O3 as carrier, Ni-Cu bimetal as active component and Ca as additive. And t...
DESIGN OF FLYING SHEAR DEVICE AND ALGORITHM BASED ON MOTION CONTROL SYSTEM
The flying shear device and algorithm design using the SIEMENS S7-300 series PLC SINAMIC SI20 motion controller and the motion control system based on the realization of the servo motor with high precision and high stabi...