Dynamic relaxation method in analysis of reinforced concrete bent elements
Journal Title: Bulletin of the Military University of Technology - Year 2015, Vol 64, Issue 4
Abstract
The paper presents a method for the analysis of nonlinear behaviour of reinforced concrete bent elements subjected to short-term static load. The considerations in the range of modelling of deformation processes of reinforced concrete element were carried out. The method of structure effort analysis was developed using the finite difference method. The Dynamic Relaxation Method, which — after introduction of critical damping — allows for description of the static behaviour of a structural element, was used to solve the system of nonlinear equilibrium equations. In order to increase the method effectiveness in the range of the post-critical analysis, the Arc Length Parameter on the equilibrium path was introduced into the computational procedure.[b]Keywords[/b]: reinforced concrete elements, physical nonlinearity, geometrical nonlinearity, dynamic relaxation method, arc-length method
Authors and Affiliations
Anna Szcześniak, Adam Stolarski
Keywords
Related Articles
- EP ID EP77492
- DOI 10.5604/12345865.1186402
- Views 80
- Downloads 0
A simplified model of concrete for analysis of reinforced concrete elements
The elastic-plastic material model for concrete developed by considering the stress softening and degradation of the deformation modulus for the concrete was presented in the paper. A reduced plane stress state for the c...
Investigation of Reactive Powder Concrete (RPC)
Results of investigations of reactive powder concrete (RPC) are presented in the paper. Optimization of the concrete composition was performed to achieve the highest degree of grains packing based on the optimal graining...
Collective protection against contamination
The paper describes general rules for the use of collective protection against contamination. There are presented certain recommendations for functional and operational requirements in the case of collective protection m...
Wnioskowanie diagnostyczne o stanie obiektu technicznego w logice k-wartościowej
W prezentowanym artykule przedstawiono problematykę opisującą teoretyczne podstawy wnioskowania (podejmowania decyzji) w logice wielowartościowej. Znaczna część artykułu dotyczy opisu podstaw opracowania logik k-wartości...
Zastosowanie logiki czterowartościowej w procesie wnioskowania w systemach diagnostycznych
W artykule zaprezentowano zastosowanie logiki czterowartościowej w procesie wnioskowania w systemach diagnostycznych. W tym celu przedstawiono i zdefiniowano strukturę inteligentnego systemu diagnostycznego DIAG 2. Opisa...