Dynamic State of Low Power Asynchronous Motors in Direct-on-Line Starting
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2017, Vol 41, Issue 41
Abstract
The research opportunity is explained by the results obtained in modelling and simulation of asynchronous motors, in the purpose of increasing their technical and economic performances when they operate in dynamic states. The study of the dynamic state is compulsory for low and very low power asynchronous motors which are used for driving industrial robots. In order to have simulation results, which are to be close to reality (those established experimentally), it is necessary to know the main inductance and the leakage inductance of the windings, their dependence upon the machine load, so upon the magnetic saturation. In this paper there are presented results, simulations and experimental tests are carried out in order to establish the errors which occur, for correcting the mathematical model used. With the help of the mathematical model presented in this paper, much complex dynamic states can also be studied, caused by the variation of the voltage, of the resistant torque, of the inertia moment etc. The starting characteristics have been computed considering magnetic saturation and current pressing, the results being: starting current Ip=4.208*IN, starting time tp=0.17s. It is considered that this study of asynchronous motor starting is justified, with an eye to obtaining some indications for their optimum construction and operation.
Authors and Affiliations
Ion Vlad, Aurel Campeanu, Sorin Enache, Monica Adela Enache
Keywords
Related Articles
- EP ID EP264050
- DOI -
- Views 120
- Downloads 0
INTEGRATED SYSTEM OF PRODUCTION AND ADJUSTMENT OF AC ELECTRIC ENERGY PARAMETERS FOR LOW POWER ISOLATED SITES THAT USE WIND ENERGY AS PRIMARY ENERGY
This paper presents research results regarding the realization as unit block of the system made from a single-phase permanent magnet synchronous generator and a single-phase transformer. The proposed synchronous generato...
Some Problems Concerning Power Management System for More Electric Aircraft
This paper aims to present some problems concerning the electric power management systems of aircraft. In the first sections are presented some converters topologies used on aircraft, principles and digital control s...
AN AGGREGATE MULTI-LOOP CONTROL FOR A DC SERVODRIVE. THE DESIGN OF THE NEURO-FUZZY CONTROLLER
The purpose of the study is the synthesis of a reliable and robust fuzzy controller for a 2nd order DC servodrive. A first step is to prepare the computations associated to the main control loops for the above mentioned...
DIGITAL EQUIPMENT FOR THE TEMPERATURE CONTROL INSIDE AN ENCLOSURE. THE HARDWARE AND SOME EXPERIMENTAL RESULTS
The paper deals with an experimental hardware platform designed to implement and test different control algorithms for the temperature inside a thermal enclosure. The equipment was designed in a modular way and its main...
Predictive versus Classic Control of the Induction Motor Drives
The paper deals with techniques which use the predictive concepts in order to obtain both the pulse width modulation strategy of a voltage fed inverter and the predictive control of the induction motor drive. Concerning...