Dynamics and Lubrication Problem Analysis of Main Bearings for IC Engines Based on Coupling between a Crankshaft and a Flexible Whole Engine Block
Journal Title: Tribology in Industry - Year 2018, Vol 40, Issue 1
Abstract
The article presents the solution to the interconnected problem of main bearings dynamics for the forced internal combustion (IC) engine. For the crankshaft main bearings system of the (IC) engines it is necessary to consider the cross-coupling effect of the tribounits arising from elastic links of bearings and journals (by means of an engine crankcase and a crankshaft). The technique is based on the iterative scheme of the solution of four tasks given above. It analyzes not only the influence of macrogeometry parameters of each main bearing and the influence of non-Newtonian properties of lubricant, but also elastic characteristics of a crankshaft and crankcase and supports displacements caused by the thermal deformation of an engine crankcase. The influence of technological coaxiality tolerance for bearings and necks of a crankshaft is also estimated. The modeling results of two types of engines are compared to various design of a crankcase. The research shows the necessity of applying the integrated approaches which allow considering simultaneously both the features of autonomous bearings and many facts of their interaction.
Authors and Affiliations
Y. Rozhdestvensky, N. Khozeniuk, S. Surovtsev
Keywords
Related Articles
- EP ID EP276158
- DOI 10.24874/ti.2018.40.01.13
- Views 91
- Downloads 0
Wear Behavior of Materials Based on Cu/Cr and Cu/Cr/W used for Welding Electrodes
The paper presents experimental research regarding the wear behavior of some composite materials based on Cu/Cr and Cu/Cr/W prepared by Powder Metallurgy (PM) route. Because of low solubility between Cu and Cr is very di...
Traction Possibilities of Mining Railways with Frictional Drives
Present market conditions prefer an implementation in mining some highly efficient coal longwalls, which must be insured with a supply of proper machines and equipment as well as working there men, mainly by suspended...
A Short Review on Frictional Contact Stress Distribution in Involute Gears
In this paper, the gear contact evaluation models developed using various methods have been discussed. The new experimental and numerical methods have been presented. The research papers are classified into frictionless...
Characterization and Tribological Properties of Hard Anodized and Micro Arc Oxidized 5754 Quality Aluminum Alloy
This study was initiated to compare the tribological performances of a 5754 quality aluminum alloy after hard anodic oxidation and micro arc oxidation processes. The structural analyses of the coatings were performed usi...
Tribological Study of Biocompatible Hybrid Organic Molecules Film with Antibacterial Effect
Optical glass is widely used in bioengineering and various utilities such as public touchscreen displays and mobile devices. This work evaluates the features of anti‐bacterial and anti‐adhesion on Octadecyltrichlorosilan...