Economic justification for printing threaded joints for wood-based materials
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2016, Vol 96, Issue 1
Abstract
Economic justification for printing threaded joints for wood-based materials. Screws are popular elements used to connect wood-based panels. They are typically made of metal, which means that their strength is 10- up to 15-fold greater than that of connected wood materials. The paper presents results of an experiment, in which screws for wood material were produced by 3D printing in the Fused Deposition Modeling (FDM) technology. The aim was to experimentally verify the economic justification for the manufacture of screws by 3D printing. Keywords:
Authors and Affiliations
MACIEJ SYDOR, MARCIN WOŁPIUK
Keywords
Related Articles
- EP ID EP362310
- DOI -
- Views 59
- Downloads 0
К вопросу об использовании низкокачественной древесины сосны
To question about the use of bad quality wood of Scots pine. In the article the results of research of viability of wood-staining fungus are pointed depending on the parameters of drying of dead wood of Scots pine. Keywo...
Messung der Formaldehydabgabe in der Holzwerkstoffproduktion in Echtzeit mithilfe eines Laseranalysator GasEye HCHO
Messung der Formaldehydabgabe in der Holzwerkstoffproduktion in Echtzeit mithilfe eines Laseranalysator GasEye HCHO. Die vorliegende Arbeit stellt Proben der Messung der Formaldehydabgabe mittels eines Laseranalysators a...
Strategies of the choice of the type of protection of an industrial pattern1 in the furniture industry – how companies can effectively safeguard themselves against imitation
Strategies of the choice of the type of protection of an industrial pattern in the furniture industry – how companies can effectively safeguard themselves against imitation. In the furniture industry it is a very common...
Computertomograph und Bandsägen steigern Ausbeute in großen Sägewerken
Computertomograph und Bandsägen steigern Ausbeute in großen Sägewerken. In dem Referat wurde das erste Deutsche Sägewerk mit Computertomograph-Scanner und Bandsägen beschrieben. Es ist ein Sägewerk zum Einschnitt von Ele...
Analysis of explosive parameters of eucalyptus dust in wood and furniture industry
Analysis of explosive parameters of eucalyptus dust in wood and furniture industry. In the article are presented research results of the maximum explosion pressure, maximum rate of explosion pressure rise, low explosion...