EFFECT OF A DIELECTRIC BARRIER ON THE ELECTRIC FIELD DISTRIBUTION IN HIGH-VOLTAGE COMPOSITE INSULATION OF ELECTRIC MACHINES
Journal Title: Електротехніка і Електромеханіка - Year 2018, Vol 0, Issue 6
Abstract
Introduction. Modern high-voltage systems for composite insulation of electrical machines consist of tape glass mica paper materials (dry or pre-impregnated). The electrical characteristics of a multilayer composite insulation system are determined by both the fractional content of the individual components and their electrophysical properties. Purpose. The analysis of the influence of electrophysical characteristics and thickness (fraction) of the dielectric barrier on the distribution of the electric field in the composite high-voltage insulation of electrical machines. Methodology. Simulation of surface charge accumulation at the interface between the substrate and the dielectric barrier is based on the Maxwell–Wagner theory for interfacial polarization. Practical value. The influence of the electrophysical characteristics and thickness of the dielectric barrier on the distribution of the electric field has been established. In the steady state, the electric field strength in the dielectric barrier exceeds the average value by 50 %. In the region of small transition times (up to 1 s), the relative dielectric constant of the barrier has a significant effect on the distribution of the electric field. The use of a dielectric barrier with a higher dielectric constant and fractional content in comparison with the substrate leads to an increase in electric field strength by 5 % relative to the average value in composite insulation. Experimental studies of the long-term electrical strength of glass mica-belt ribbons in the cured (thermosetting) state are consistent with the simulation results. Composite insulation based on glass fiber mica tape with a high content of the mica barrier and fiberglass of smaller thickness has (8-16) % higher values of long-term electric strength.
Authors and Affiliations
G. V. Bezprozvannych, A. N. Boyko, A. V. Roginskiy
Keywords
Related Articles
- EP ID EP495495
- DOI 10.20998/2074-272X.2018.6.09
- Views 114
- Downloads 0
MULTIPHASE WINDING HOMOLOGOUS SERIES SYNTHESIS AND HARMONIC ANALYSIS
Multiphase windings are shown to form three types of homology. A bipolar winding homology formation algorithm is developed. Change in electromagnetic properties of the windings forming a homologous series proves to uniqu...
A MATHEMATICAL MODEL OF THERMAL POWER PLANTS SMOKE EXHAUSTERS INDUCTION MOTORS SYSTEM OPERATION MODES
Purpose. Development of a model-software complex (MSC) for computer analysis of modes of the system of induction motors (IM) of smoke exhausters of thermal power plant (TPP), the basic elements of which are mathematical...
SCREENING MAGNETIC FIELDS OF THE POWER FREQUENCY BY THE WALLS OF HOUSES
Purpose. To investigate the effectiveness of the screening of the magnetic field at 50 Hz by the walls of house. Methodology. To study the effectiveness of the screening we used the measurements of the magnetic field 1)...
DIRECT FREQUENCY CONVERTER WITH ARTIFICIAL AND NATURAL COMMUTATION FOR BRUSHLESS ASYNCHRONIZED MACHINES
The comparative analysis of direct frequency converters with artificial and natural- switching term of the cyclical control algorithm is presented; the recommendations for their using in brushless asynchronized machines...
ADDING EFFECT OF CURRENT DISPLACEMENT AND MAGNETIC CIRCUIT SATURATION IN AN ASYNCHRONOUS MOTOR MATHEMATICAL MODEL
A methodology of an asynchronous motor mathematical model synthesis is described. Experiments are suggested to be conducted in the following sequence. Geometrical models are first built in AutoCAD, then imported to Comso...