Effect of a flameretardant coating on the burning parameters of wood samples
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 2, Issue 10
Abstract
<span lang="EN-US">The studies of influence of wood fire protection on ignition have established parameters of flame propagation and combustion suppression which makes it possible to influence this process. It was proved that fire protection consists in creation of a layer on the material surface which prevents the material from warming up to its critical temperature. Experimental studies confirmed that the untreated wood specimen ignited under thermal action resulting in its combustion with a burnout rate of 18 g/(m<sup>2</sup>∙s). With an increase in intensity of combustion of the ignition gas mixture by 25 % and 50 %, rate of the specimen weight loss increased by 1.4 times and 1.8 times, respectively. In the case of wood impregnation, the rate of weight loss was reduced to 4.8 g/(m<sup>2</sup>∙s) due to decomposition of flame retardants under thermal action with release of non-combustible gases which inhibited material oxidation and formed a coke layer. When treating wood with an inorganic coating, a heat-resistant ceramic film is formed on the wood surface which reduces the burnout rate 3.8 times. But with an increase in intensity of combustion of the igniting gas mixture by 50 %, the wood specimen has ignited which was reflected by increase in the weight loss rate. Application of organic-mineral coatings under thermal action has resulted in formation of a layer of foamed coke, inhibition of heat transfer from high-temperature flame and reduction of burnout rate to 3 g/(m<sup>2</sup>∙s). This has made it possible to determine conditions of change and inhibition of the combustion parameters for fire protection of wood by creation of a barrier for thermal conductivity. The results of comparison of experimental data on the wood burning rate with the derived analytical equations have shown conformity between them. Thus, there are grounds to assert about the possibility of directed regulation of processes of wood fire protection by using flame retardant coatings capable of forming a protective layer on the material surface that reduces the wood burnout rate</span>
Authors and Affiliations
Yuriy Tsapko, Аleksii Tsapko, Olga Bondarenko
Keywords
Related Articles
- EP ID EP666344
- DOI 10.15587/1729-4061.2019.163591
- Views 69
- Downloads 0
Comparison of products of whey proteins concentrate proteolysis, obtained by different proteolytic preparations
<p>An important source of bioactive peptides is hydrolyzed products based on milk whey: hypoallergenic products, hydrolyzates for baby food, and products for athletes. However, in their production, proteolytic preparatio...
Development of technical component of the methodology for projectvector management of educational environments
<p class="a">We propose tools for planning and administration of the technological component of the methodology of project-vector management of educational environments that were implemented in the applied information te...
Substantiating the requirements to functional indicators for the manipulators of mobile robotic demining complexes
<p>It has been proposed that humanitarian demining should involve mobile robotic complexes equipped with manipulators based on mechanisms with parallel kinematic structures. The features of design and characteristics of...
ESTIMATION OF FIRE PROTECTION EFFICIENCY OF ARTICLES MADE FROM REED UNDER AN EXTERNAL ACTION OF GASOLINE FLAME
Our study into the process of reed ignition has established the mechanisms of heat transfer to a material, which makes it possible to influence this process. It has been proven that the process of ignition implies heatin...
Development of hardware and software for calculation and monitoring of the unbalance factor in threephase voltage system
<p>Hardware and software for measuring and monitoring the unbalance factor of the three-phase voltage system is developed. The shortcomings of the existing technical and software solutions for calculating the unbalance f...