Effect of Boundary Conditions on Buckling Load for Laminated Composite Plates
Journal Title: Global Journal of Engineering Sciences - Year 2019, Vol 2, Issue 1
Abstract
It is observed that, for all cases the buckling load increases with the mode number but at different rates depending on whether the plate is simply supported, clamped or clamped – simply supported. The buckling load is a minimum when the plate is simply supported and a maximum when the plate is clamped. Because of the rigidity of clamped boundary condition, the buckling load is higher than in simply supported boundary condition. It is also observed that as the mode number increases, the plate needs additional support.
Authors and Affiliations
Osama Mohammed Elmardi Suleiman
Keywords
Related Articles
- EP ID EP592543
- DOI 10.33552/GJES.2019.02.000527
- Views 72
- Downloads 0
Correlations of Physicomechanical Properties of Quarry Aggregates - The Case of Two Quarries in Ghana
Granite and its derivatives are the dominant rock source of most quarry products (rock aggregates) in Ghana. However, they may differ in term of quality, the mineralogic composition and so forth in their geospatial locat...
Porosity Influenced on Prediction of Enterobacter Transport in Heterogeneous Sand Graved Depositions
Porosity variation was observed to established high predominant heterogeneous concentration in this study, this condition was monitored on development of derived model to monitor the transport to phreatic depositions, su...
Initial Yield Surface of Shape Memory Alloy in Stress Induced Martensitic Phase Transformation
Based on the critical conditions for nucleation and the actual eigenstrain of a given shape memory alloy in the stress induced martensitic phase transformation, the closed-form expression of its corresponding initial yie...
The Unique Composition and Stability of Water-Fuel Emulsion
The aim of the research is to analyze the use of water-fuel emulsions (WFE) and to develop a method for producing highly stable WFE with a high-water content. The method is based on the introduction and mixing in diesel...
Effect of Lamination Scheme on Buckling Load for Laminated Composite Decks Plates
New numerical results are generated for in – plane compressive biaxial buckling which serve to quantify the effects of lamination scheme on buckling loading. The results indicate that the symmetric laminate is stiffer th...