Effect of Braze Welding Parameters on the Structure and Mechanical Properties of Joints Made of Steel CPW 800. Part 1: Arc Braze Welding
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2016, Vol 60, Issue 6
Abstract
Presently, the reduction of kerb weight consists in the replacement of previously used structural materials with new ones, characterised by more favourable operating parameters. Advantageous mechanical properties of steel elements are primarily obtained through precise hot treatment performed after cold rolling or, in cases of hot-rolled products, through thermo-mechanical treatment. When subjected to welding, the above-named materials reveal high sensitivity to intense thermal cycles accompanying welding processes. The article presents the results of technological tests concerning the effect of arc weld brazing on the structural and mechanical properties of joints made of multiphase steel CPW 800.
Authors and Affiliations
Maciej Różański, Sebastian Stano, Adam Grajcar
Keywords
Related Articles
- EP ID EP257947
- DOI 10.17729/ebis.2016.6/1
- Views 64
- Downloads 0
Ultrasonic Tests of FSW Joints of Thicknesses Below 8 mm
The article presents results of ultrasonic tests concerning 6 mm thick FSW joints made of aluminium grade 2017. The tests were performed using joints with artificial post-weld welding imperfections and joints characteris...
Properties of welded joints made of cast steel GX8CrNi12-1
The article presents test results concerning welded joints made of cast steel GX8CrNi12-1. The above-named cast steel has a martensitic microstructure and can be used in pressure equipment operated at ambient and high te...
Damping factor function in AC electric arc models. Part 4: Arc model selection criteria and determination of time constant in low current arc
Causes of problems in strict classification of arcs into two categories: low and high current have been described. Assumption has been taken that processes in column can be approximated with one of two models: Mayr or Ca...
Selected Possibilities of the FSW and FSSW Methods in the Removal of Material Defects and Welding Imperfections
The article describes unconventional applications of friction stir welding (FSW; linear) and friction stir spot welding (FSSW) processes including the possibility of removing material defects and welding imperfections. T...
Structure and Properties of Nickel Alloy Overlay Welds Plasma Cladded on Creep-Resistant Steel Tubes
The article presents tests aimed to develop technological parameters of the plasma surfacing of Inconel 625 overlay welds onto boiler tubes (φ 45 × 5 mm) made of steel 13CrMo4-5, providing the content of iron on the over...