Effect of Common Salt (Nacl) On Index Properties of Black Cotton Soil (BCS)
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 5
Abstract
In this research paper is to investigate the effect of Common salt (NaCl) on the index properties of Black cotton soil. This black cotton soil were mixed with various amount of Common Salt (0, 2, 4, 6, and 8) % to study the effect of Common Salt (NaCl) on consistency limits or index properties. In this study, the common salt (NaCl) is collected from shop Garha Market, Jabalpur M.P. and the Soil sample collected from NSCB Medical College, near Hostel campus Jabalpur MP. The soil falls under highly expansive category, based on consistency index and free swell. The modification of properties of soil such as physical nature, chemical composition and metallurgical properties and that soil on the nature of contaminant. These contaminant soil such organic solved or organic matter and inorganic. The laboratory test results showed the significant improvements upon the use of Common Salt (NaCl). The plasticity index reduced from 22.21 to 16.94. The liquid limit decrease from 46.30 to 33.47%. Plastic limit decrease from 22.26 to 17.87 %. Anlo increase the shrinkage limit from 12.98 to 15.98% and the free swell value reduced from 43 to 18 is observed.
Authors and Affiliations
Rajkumar Vishwakarma, Ankur Dubey, Akash Jain
Keywords
Related Articles
- EP ID EP24190
- DOI -
- Views 259
- Downloads 10
Performance Comparison of Local Route Repair and Source Route Repair In Mobile Ad Hoc Networks
MANETs often experience link breaks as the nodes are mobile. The AODV routing protocol in case of link break, repairs the route by two mechanisms local route repair or source route repair. One or another repair mechanis...
Design and Fabrication of Mini Injection Molding Machine
Injection molding is considered to be one of the most prominent processes for mass production of plastic components. The objective of this project is to design and fabrication of mini injection molding machine to produc...
Implicit Assessment of Lead Extraction Based On Its As-Mined Content and Ferric Sulphate Concentration during Leaching In the Sulphate Solution
An implicit assessment of lead extraction was carried out based on its as-mined content in galena and ferric sulphate concentration during leaching in the sulphate solution. A two-factorial empirical model was derived f...
Numerical Investigation in Effective Heat Transfer on Cylindrical Fins
the purpose of this paper is to investigate the overall effectiveness of heat transfer on aluminium casing of high wattage floodlight lamp using cylindrical fins in a steady state condition. A generalized study has been...
Electrical Safety Analyzer for Biomedical Equipment
In order to achieve the required high level of electrical safety in electro-medical equipment. To develop standards and guidelines to control their design as well as their use in hospitals and other health care delivery...