Effect of ECAP process on structure and hardness of AlMg3 aluminium alloy
Journal Title: Archives of Materials Science and Engineering - Year 2017, Vol 2, Issue 84
Abstract
Purpose: In the present study, the effect of ECAP die and number of ECAP pressings on the structure evolution and hardness of AlMg3 aluminium alloy was investigated. Design/methodology/approach: Commercial AlMg3 aluminium alloy in the as-cast condition was processed by Equal Channel Angular Pressing method through route A using two different ECAP dies – conventional and modified with additional twist angle. Samples were processed at ambient temperature up to four passes. The investigation was carried out at ambient temperature. Two different ECAP dies were used to investigate the effect of design modification on the possibility of grain refinement to sub-micrometer size. Findings: The experimental results showed that the modification of ECAP die provides to additional grain refinement and introduces a greater amount of plastic strain into the material which results in greater increase in the properties of the investigated material. Research limitations/implications: The presented investigation results were carried out on samples, not on final products. Practical implications: Current research is moving towards to develop high strength materials with increased mechanical properties and refined microstructure that are known as ultra-fine-grained materials, compared to well-known with coarse-grained microstructure. Originality/value: The paper focuses on the investigation of microstructure evolution using mainly polarised light microscopy that reveals shear, micro-shear and slip bands that refine the microstructure of aluminium alloys. In addition, to evaluate the grain size of as ECAPed specimen, EBSD investigation was carried out.
Authors and Affiliations
P. Snopiński, T. Tański, O. Hilšer, A. Lubos
Accuracy of polymeric dental bridges manufactured by stereolythography
Purpose: Purpose of this paper is to investigate the accuracy of dental bridges producedvia digital light projection stereolithography process.Design/methodology/approach: 3D printer Rapidshape D30 was used for manufactu...
The methods of globoid surface modeling in CAD
Purpose: Modeling of globoid worm surface is a difficult issue of modeling of complexsurfaces in CAD. Worm gears are a challenge for designers because of the constructionand the functions that have to be met, as well. Th...
Quality-cost analysis of modern carburising technology implementation in the production cycle of cog elements for the aviation industry
Purpose: The aim of the study was to analyse the possibility of introducing vacuum carburising technology with pre-nitriding in the aviation industry. Design/methodology/approach: The samples have been tested with new te...
First principles investigations of HgX (X=S, Se and Te)
Purpose: The aim of this study is to determine the structural, and mechanical propertiesof Hg chalcogenide materials (HgX; X=S, Se, Te) in the zinc-blende structure which arepresented as promising candidates for modern o...
Computer simulation of hardness and microstructure of casted steel 100Cr6
Purpose: The research purpose is to upgrade the mathematical modelling and computersimulation of casting of steel.Design/methodology/approach: Based on theoretical analyses of physical processeswhich exist in casting sys...