Effect of Electron Beam Welding and Heat Treatment on the Structure and Properties of Technical Titanium with an Alloying Dope of Boron
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2018, Vol 62, Issue 5
Abstract
The study discussed in the article included the analysis of features characterising the formation of an electron beam-welded joint made of a titanium alloy (Ti–TiB). The study also involved the investigation of the effect of heat treatment on structural-phase transformations in the weld metal and in the heat affected zone. The heat treatment of the welded joints resulted in the decomposition of the metastable phase, the distribution of boron particles in the structure as well as the increase in the structural homogeneity, leading to the improvement of mechanical properties.
Authors and Affiliations
G. Hryhorenko, Walierij Ju. Belous
Keywords
Related Articles
- EP ID EP426553
- DOI 10.17729/ebis.2018.5/9
- Views 46
- Downloads 0
Welding of Steel Sheets with Zinc Protective Coatings versus the Emission of Welding Fumes into the Work Environment
The article presents the results of tests aimed to assess the effect of the gas-shielded metal arc welding of protectively coated sheets on the emission of welding fumes (CO, NOx). The tests made it possible to identify...
Laser Welding of T-Joints Made of Thin Austenitic Sheets
The article presents test results concerning the CO₂ and Yb:YAG laser welding of thin-walled T-joints made of steel X5CrNi18-10 (steel 304), X6CrNi18-10 (steel 304H) and X15CrNiSi25-21 (steel 310) selected as stainless s...
Targeted Weld Seam Formation and Energy Reduction at Magnetic Pulse Welding (MPW)
Magnetic pulse welding is based on the high velocity impact of two joining partners and a promising technology especially for the joining of dissimilar metallic components. Under proper conditions, a solid-state bond for...
Properties of welded joints made of cast steel GX8CrNi12-1
The article presents test results concerning welded joints made of cast steel GX8CrNi12-1. The above-named cast steel has a martensitic microstructure and can be used in pressure equipment operated at ambient and high te...
Quality Assessment of Welded Joints Using TOFD Technique in View of Requirements of Current Standards
The article describes the classification and evaluation of TOFD indications according to PN-EN ISO 10863 and PN-EN ISO 15626 as well as identifies, discusses and illustrates numerous examples of typical problems connecte...