EFFECT OF FINISHING AND POLISHING ON MECHANICAL PROPERTIES OF COMPOSITE.

Journal Title: International Journal of Advanced Research (IJAR) - Year 2019, Vol 7, Issue 7

Abstract

Objective: To evaluate the effect of finishing/polishing systems on the surface roughness, micro-hardness, and modulus of elasticity of different types of composite-resins. Materials and Methods:Specimens were made of four types of composite-resins that packed into special designed blocks, after that, they subjected to light cure. Aluminum-oxide discs (Sof-Lex, 3M ESPE) used to finish\\polish half of the specimens immediately. Surface roughness (Ra, μm; n=20), Vickers micro-hardness (200g; 15s; n=20) and Modulus of elasticity (E=FL3/4BH3d, n=20) were measured. The specimens tested before and after immediate finishing/polishing. Data were analyzed by ANOVA and Tukey post Hoc (P<0.05). Result: Finishing/polishing system significantly influenced roughness, micro-hardness and modulus of elasticity (P<0.05). Group A1 [universal] produced significantly least surface roughness (0.07?0.03Ra, ?m) while Group A4 [nano-filled] exhibit the highest micro-hardness (90.06 +3.53VHN) and modulus of elasticity (7.17 +0.45 GPa) in comparison to others. Conclusion: Finishing and polishing procedures have apparent effect on different mechanical properties of composite-resins, render them as critical steps to produce effective and efficient restoration.

Authors and Affiliations

Abdulmajeed Khalaf Alharthi, Mohammed Hamed Al-Suwat, Abdulrahman Ghazai Aljuaid, Mohammed Khalil Fahmi and Mohamed Ismail Ebrahim.

Keywords

Related Articles

EVALUATION OF RADIATION DOSE TO THYROID GLANDS DURING DIAGNOSTIC MAMMOGRAPHY; A COMPARISON OF CRANIO CAUDAL (CC) AND MEDIO LATERAL OBLIQUE (MLO) VIEWS.

Objectives: Mammogram plays a major role in diagnosing breast cancers in the medical imaging sector though it can cause a radiation hazard on thyroid gland. This study was design to determine the association of Entrance...

STUDY OF THE PHYTOPLANKTON POPULATION IN THE MBOI KA E STREAM, ENCARNACION, PARAGUAY.

The study was conducted during the four seasons of 2015 in the water basin of the Mboi Ka\'e stream in the city of Encarnaci?n. The objective of the research was to evaluate the phytoplankton population in the Mboi Ka e...

RECONSTRUCTION OF THE LEGAL PROTECTION OF LAND RIGHTS HOLDERS IN LAND PROCUREMENT IN THE PUBLIC INTEREST BASED ON THE VALUE OF PANCASILA JUSTICE.

Normatively, the constitution guarantees the protection of the holders of land rights to the land it owns as stipulated in Article28 H paragraph (4) and Article 28 J paragraph (2) of the NRI Constitution of the Year1945....

DEVELOPMENT OF A TURBINE SYSTEM TO EXTRACTION DEEP UNDERGROUNDWATER.

Due to the recent lack of rainfall, the undergroundwater level has dropped significantly, especially in the desert lands. Therefore, it is necessary to use multi-stage turbo pumps, but these pumps need high power to be u...

DIAGNOSTIC IMPORTANCE OF MATRIX METALLOPROTEINASE 2 AND 9 AS ADDITIONAL BIOMARKERS IN THE SERA OF BREAST CANCER PATIENTS.

Introduction: Tumor invasion and metastasis are the critical steps in breast cancer, leading to detrimental conditions. Matrix metalloproteinase (MMP) 2 and 9 play significant role in progression of breast cancer by degr...

Download PDF file
  • EP ID EP616726
  • DOI 10.21474/IJAR01/9378
  • Views 67
  • Downloads 0

How To Cite

Abdulmajeed Khalaf Alharthi, Mohammed Hamed Al-Suwat, Abdulrahman Ghazai Aljuaid, Mohammed Khalil Fahmi and Mohamed Ismail Ebrahim. (2019). EFFECT OF FINISHING AND POLISHING ON MECHANICAL PROPERTIES OF COMPOSITE.. International Journal of Advanced Research (IJAR), 7(7), 430-440. https://europub.co.uk/articles/-A-616726