Effect of infill Parameter on compression property in FDM Process
Journal Title: International Journal of engineering Research and Applications - Year 2017, Vol 7, Issue 10
Abstract
The major parameters of FDM are Infill Density, Layer thickness, Shell thickness, Print speed which considered for mechanical testing and dimensional accuracy of the printed specimens. Fused Deposition Modeling (FDM) technology allows users to control the density of models through parameter which is termed air gap or infill. Test specimens were used with infill between 20 and 80%. Therefore, this paper discusses experimental analysis of the influence of infill density on the compressive strength in FDM specimens made of polylactic acid (PLA).The test results indicate that the compressive strength samples of the 3D-printed PLA samples increased with increasing of infill density lower infill values significantly increase the building speed, and the time of printing the sample would be increased also with increasing of infill density.
Authors and Affiliations
Dr. TahseenFadhil Abbas, Dr. Farhad Mohammad Othman, Hind Basil Ali
Keywords
Related Articles
- EP ID EP392531
- DOI 10.9790/9622-0710021619.
- Views 82
- Downloads 0
Design and Development of Solar Powered Smart Hydroponic Greenhouse.
The key objective of this paper is to present low-cost solar-powered Smart Hydroponic Greenhouse. Hydroponics is a new agricultural production system in which the production takes place in a soilless medium using water....
The Study About Gini Coefficient Model Using Public Facility Data
Nowadays the regional gaps between the metropolitan area and the local areas in Japan have expanded. We can also guess the importance of this problem from the situation which ―Headquarters for Overcoming Population Decli...
Studies Onmechanical Properties of Nano –Hemp Fibre Composite Material
The use of natural fibers instead of traditional reinforcement materials such as glass fibers, carbon provides several advantages including low density, low cost, good specific mechanical properties, and biodegradability...
Health Gamification Research – a bibliometric analysis
In the last five years, the researchers embarked on original research in Gamification for health, however the Gamification professionals and health researchers still do not know where the references of the area are. Ther...
Morphometric Analysis of a semi-arid region using GIS
In the present study an attempt has been made to study the morphometric parameters and drainage properties of a watershed of semi-arid (khad) region located at Hoshiarpur district of Punjab (India). Morphometric analysis...