Effect of mechanoactivated chemical additives on the process of gas hydrate formation
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 6
Abstract
<p>This study addresses the production of gas hydrate of methane with a high gas-hydrate-forming content in a solid phase in the isolated system at T=274 K and pressure of 5 MPa and presence of mechanically activated rocks close to the bottom of the chamber.</p><p>We used mechanically activated samples of various degrees of grinding to increase an area of contact surface of heterogeneous phases. We carried out mechanochemical activation of materials in a vertical vibrating mill (VVM).</p><p>In the study, we found out that formation of gas hydrates on activated aluminosilicates leads to the cryochemical synthesis of hydrocarbons, due to formation of additional reaction centers formed upon activation. This indicates a change in the mechanism of formation of GH during the process. We calculated three rate constants for the formation of GH of methane, which vary from 1.20×10<sup>-2</sup> to 1.25×10<sup>-2</sup> hour<sup>-1</sup>, based on semi-logarithmic anamorphosis. The study showed that formation of methane gas hydrates in presence of activated additives leads to formation of up to 5−6 % of ethane. Chromatographic method confirmed this.</p><p>This indicates possibility of carrying out a low-temperature synthesis of higher hydrocarbons in the artificial production of GH, in contrast to the known mechanochemical transformations during the process of obtaining gas from gas hydrates.</p>
Authors and Affiliations
Volodymyr Bondarenko, Olena Svietkina, Kateryna Sai
Keywords
Related Articles
- EP ID EP527769
- DOI 10.15587/1729-4061.2018.123885
- Views 73
- Downloads 0
A procedure of studying stationary motions of a rotor with attached bodies (auto-balancer) using a flat model as an example
<p>The energy method of studying rotor dynamics has been modernized. The method is applicable to the rotors mounted on isotropic elastic-viscous supports when bodies are attached to the rotors and relative motion of thes...
Study and development of the technology for hardening rope blocks by reeling
<p>The study of the efficiency of hardening the parts working in spalling conditions through reeling with rollers were performed with the help of physical simulation and showed the high effect of hardening cast steels (a...
Generalization of one algorithm for constructing recurrent splines
<p class="a">We have analyzed two algorithms, close in composition, for constructing a smoothing spline, which imply a change only in the last link of the spline when new experimental data arrive. The main feature of the...
Determining electrical losses of the traction drive of electric train based on a synchronous motor with excitation from permanent magnets
<p>We have studied a traction drive based on the synchronous motor with excitation from permanent magnets for its electrical losses. A simulation model of the traction drive is synthesized, which employs the algorithm of...
Development of the method to control telecommunication network congestion based on a neural model
<p>The circuit of congestion control using feedback by the sign of function of sensitivity to telecommunications network performance was considered. To determine a given function, the use of a simple neural network model...