Effect of Modifying and Alloying Elements on the Structure and Properties of Surfaced Layers Made of High-Tin Bronze
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2017, Vol 61, Issue 1
Abstract
The article discusses the effect of some modifying and alloying elements on the structural, mechanical and operational properties of high-tin bronze used for the submerged arc surfacing of steels. The research-related tests enabled the determination of optimum contents of the above-named elements ensuring the improvement of mechanical and operational properties through changes in the shape and structural constituent dimensions of the metal subjected to surfacing. In addition, the research revealed the favourable effect of a nickel addition (up to 2%) on the reduction of high-tin bronze penetration, on grain boundaries, in the steel base.
Authors and Affiliations
T. B. Majdanczuk, W. M. Iljuszenko, A. N. Bondarenko
Keywords
Related Articles
- EP ID EP261667
- DOI 10.17729/ebis.2017.1/5
- Views 54
- Downloads 0
Laser Welding of T-Joints Made of Thin Austenitic Sheets
The article presents test results concerning the CO₂ and Yb:YAG laser welding of thin-walled T-joints made of steel X5CrNi18-10 (steel 304), X6CrNi18-10 (steel 304H) and X15CrNiSi25-21 (steel 310) selected as stainless s...
Effect of Preheating on the Structure and Mechanical Properties of Steel S1300QL
The use of advanced structural materials entails the necessity of adapting typical welding processes to special requirements resulting from the limited weldability of new materials, often tied to their complex chemical c...
Hybrid Models of Electric Arc with Improved Dynamic Characteristics in Wide Ranges of Changes in Bipolar Current Value
The article discusses the limitations of the Mayr and Cassie linear models and of the Mayr generalized model accompanying the precise mapping of electric arc column within a wide range of changes in bipolar current. The...
The Use of 3D Scanning Technology in Measurements of Welding Distortions
The article describes primary issues related to measurements of welding distortions performed using 3D scanning methods. The study includes a review of available industrial 3D scanning solutions. The research involved th...
Properties and Structure of Resistance Short-Circuit Welded Joints in TMCP Steel S700MC
The article presents tests concerning the structure and properties of resistance short-circuit welded joints made of 10 mm thick high yield point steel S700MC. The tests revealed the significant effect of a welding therm...