EFFECT OF PROCESS PARAMETERS ON MATERIAL REMOVAL RATE (MRR) DURING TURNING OF MILD CARBON STEEL CS 1030 USING TAGUCHI METHOD
Journal Title: World Journal of Engineering Research and Technology - Year 2017, Vol 3, Issue 4
Abstract
An experimental investigation of the effect of process parameters (cutting speed, feed rate and depth of cut) on Material Removal Rate (MRR) have been carried out during CNC turning of Mild Carbon steel CS 1030 using Taguchi experimental design. An Orthogonal array has been selected and constructed to find the optimal levels and to analyze the effect of the turning parameters. The signal-to-noise (S/N) ratio has been calculated to construct the analysis of variance (ANOVA) table to study the performance characteristics in dry turning operations. The ANOVA shows that, the feed rate has the most significant role (56.79%) in producing higher MRR, followed by cutting speed (31.95%). Interaction of feed and speed has a highest significant effect on Material removal rate with 11.18% contribution. Also maximum material removal rate was achieved at optimal parametric combination of 347mm/min cutting speed, 0.458 mm/rev feed rate and 1.1 mm depth of cut.
Authors and Affiliations
Ipilakyaa T. Daniel
Keywords
Related Articles
- EP ID EP658929
- DOI -
- Views 170
- Downloads 0
STUDY OF THE PROCESSES OF DEFECT FORMATION IN SILICON, DOPED WITH COBALT
The processes of formation of deep centers in silicon mixed with cobalt are investigated by means of methods of capacitive spectroscopy. It was found that in n-Si, doped with cobalt formed four deep levels with fixed ene...
FEATURE SELECTION BOOSTER ALGORITHM FOR HIGH DIMENSIONAL DATA CLASSIFICATION
Classification problem is always a great challenge especially in a high dimensional data, though there are many classification problems and a feature selection (FS) algorithm has been developed in the past two decades. F...
FORECASTING ENERGY DEMAND IN CALABAR METROPOLIS FOR SYSTEM PLANNING AND MANAGEMENT
Electricity use has become an indicator of economic development. Population, technology, economic status of the end-user, temperature, season, and so on, are factors affecting the rate of consumption of/and demand for el...
EFFECT OF PROCESS PARAMETERS ON MATERIAL REMOVAL RATE (MRR) DURING TURNING OF MILD CARBON STEEL CS 1030 USING TAGUCHI METHOD
An experimental investigation of the effect of process parameters (cutting speed, feed rate and depth of cut) on Material Removal Rate (MRR) have been carried out during CNC turning of Mild Carbon steel CS 1030 using Tag...
INCREASING PRODUCTIVITY THROUGH LEAN MANUFACTURING SYSTEM IN INDUSTRIES
Lots of small scale industries in India are facing various problems which are mostly dealt with quality issue, shortage of material, and the most important problem which is less productivity. The main purpose of this pap...