EFFECT OF SINTERING TEMPERATURE AND TIME ON STRUCTURAL AND DIELECTRIC PROPERTIES OF TB-DOPED BATIO3 CERAMICS
Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1
Abstract
Ba1−x/2Ti1−x/2TbxO3 (x = 0.05) ceramics (BTTb5) were prepared at Ts = 1400 °C for t = 6‒24 h and at Ts = 1300‒1480 °C for t = 24 h using the cold-pressing ceramic processing technique. All of BTTb5 ceramics satisfy EIA X5R dielectric specification and exhibit a tetragonal perovskite structure. The sintering temperature and the sintering time have little influence on the crystal structure and dielectric properties of BTTb5. The optimum preparation condition of BTTb5 is determined as Ts = 1400 °C for t = 12 h because of higher relative density (ρr = 94 %) and lower dielectric loss (tan δ = 0.0108). As the sintering time increases, the XRD and EPR results reveal that more B-site Tb4+ ions are reduced to A-site Tb3+. The higher sintering temperature is apt to ceramic densification and the incorporation of more Tb4+ ions into B-sites.
Authors and Affiliations
Dayong Lu, Xianglu Gao, Yuchun Fu
Keywords
Related Articles
- EP ID EP413517
- DOI 10.26480/icnmim.01.2018.79.82
- Views 75
- Downloads 0
ADSORPTION OF CONGO RED BY MG(OH)2 MODIFIED DIATOMITE
The diatomite was modified by a grinding method to obtain a magnesium hydroxide-modified diatomite composite material. The prepared material was used as an adsorbent for the adsorption of anionic dye congo Red. The influ...
STUDY ON EXTRACTION OF FLAVONOIDS FROM FRUIT OF ROSA DAVURICA P ALL BY DIFFERENT METHODS AND ITS ANTIOXIDANT ACTIVITY
Taking the extraction yield of total flavonoids from fruit of Rosa davurica Pall. (FRDP) as index, the optimum extraction technology and in vitro antioxidant properties of flavonoid obtained from various modern extractio...
DESIGN AND CALCULATION OF PIEZOELECTRIC POWER GENERATION DEVICE ON TIRE PRESSURE MONITORING SYSTEM
The structure of piezoelectric power generation device on tire pressure monitoring system was put forward in this paper. The formula for the energy output of the piezoelectric generator was solved. The natural frequency...
DESIGN OF CONTROL INTEGRATION PLATFORM FOR THERMAL HEAT SUPPLY NETWORK BASED ON KINGVIEW
This design mainly uses Kingview software to design the intelligent thermal heat supply network that will provide operations of the large-scale central heating business with one-stop systematic solutions. From the point...
GREEN SYNTHESIS OF MCM-49 ZEOLITE USING LOW TOXICITY TEMPLATE
MCM-49 zeolites have been synthesized by dynamic hydrothermal method with piperazine (PIP) as low toxicity template to replace traditional cancerogenic hexamethyleneimine (HMI). The structure and physical-chemical proper...