Effect of Sintering Temperature on Mechanical Properties of Mg-Zr Alloy
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 5
Abstract
Magnesium, Zirconium alloy is developed in three different sintering temperatures through powder metallurgy technique followed by hot extrusion in this work. The application of this material is for orthopedic implants. Magnesium alloy result shows improvement in density, hardness, tensile strength and minimized porosity on increasing sintering temperature. The surface characterization of the alloy is carried out through optical microscopy. The SEM (Scanning Electron Microscope) analysis of fractured surface of Mg alloy shows quasi-cleavage fracture.
Authors and Affiliations
T. Judson Durai, M. Sivapragash, M. Edwin Sahayaraj
Keywords
Related Articles
- EP ID EP245033
- DOI -
- Views 88
- Downloads 0
The Microstructure, Hardness and XRD Analysis of in-Situ Al 6061-TiB2 Metal Matrix Composites with Different Reaction Holding Times
Aluminum Metal Matrix Composite (AMMC) is studied and extensively established for various commercial and industrial applications due to mechanical properties, low thermal expansion coefficient and low density, higher the...
A Study on the Increasing Risks(Trauma) Related to an Ambulance for a Paramedic and Patient- A Review
This paper is to evaluate the effectiveness of pre-hospital emergency care. The objective of this review is to study how the ambulance’s transport time can be reduced. It aims to address the waiting time of the patient b...
Fabrication and Evaluation of Mechanical Properties of Bermuda Grass Root Fiber/Polyester Composites
Bermuda grass root fibers were comprehensively characterized to access their potential as reinforcement materials in polymer composites. An experimental study has been conducted to investigate the mechanical properties o...
Multi Objective Optimization of Laminar Mixed Convective Heat Transfer of Electronic Chips in A Horizontal channel with Vortex Generator
This paper represents laminar mixed convective heat transfer in a channel (horizontal) including five electronic chips mounted on the bottom wall with a vortex generator (triangular bar), VG and is carried out in order t...
A Investigation on Mechanical and Metallurgical Properties of Steel EN24 and SiC MMCs
In this present research work, microstructure and mechanical properties of steel EN 24 and SiC metal matrix composites were investigated. The composites were prepared using liquid metallurgy process in which steel EN24 a...