Effect of Windows Sizes on Air Circulation inside Building using CFD Simulation
Journal Title: International Journal of Civil, Structural, Environmental and Infrastructure Engineering Research and Development (IJCSEIERD) - Year 2017, Vol 7, Issue 4
Abstract
Indoor air environment of residential building depends on the circulation of air inside the building and exhaust system. It is necessary to have uniform flow of air inside the building at working plane. Buildings are design with natural ventilation strategy to reduce the energy consumption of building. Natural ventilation depends on inside and outside building parameters like, outside wind speed, obstruction in room, shape of building, inlet and out let windows location size, orientation, bouncy force due to temperature variation in wind. Computational fluid dynamics can be used to study the air flow inside room. CFD Simulation results are validated with experimental data and found to be nearby. In present study, effect of windows size on air circulation was studied. Modeling of room was done in Autodesk Revit software and exported to CFD software. Different cases are considered for simulation with constant inlet window size and varying outlet window size. At working plane, velocity reading is recorded for every case. Velocity vector diagram is compared to understand the circulation of air inside the room. As per observation it is found that the velocity vectors at observation points are reducing with increase in outlet window size.
Authors and Affiliations
Mahesh R. Nalamwar, Dhananjay K. Parbat, D. P. Singh
Experimental Behavior of Clay Masonry Wall with Opening Under Effect of Lateral Forces
This paper presents an experimental test program, on eight clay brick masonry walls, under the effect of lateral forces. The effect of opening, boundary condition and vertical compression forces were assumed as, variable...
Effect of Various Accelerators on Different Strength Parameters of M - 20 Grade of Concrete
In this paper, researchers have presented an experimental study on concrete cubes and beams to check the impact of accelerators on the compressive and flexural strength of concrete at normal days of curing. During this e...
The Removal of Manganese (II) in Aqueous Solution by using Reduced Graphene Oxide
Due to growing population, new industries are being set up and the production is being increased with better quality products in the market using new technologies. But at the same time rising pollution causing concern sp...
PRELIMINARY AND FAST RISK ASSESSMENT OF DEBRIS-FLOW HAZARDS USING DIFFERENT ARTIFICIAL NEURAL NETWORKS
Researches revealed that prediction of occurrence of debris-flow hazards can be achieved by artificial intelligence techniques. In the paper three different artificial neural networks (ANNs), i.e., back-propagation neura...
Exploring Causes of Attrition for Leading Private University of India
The education system in India is expanding and is reaching new heights in all the streams. Besides various government initiatives, the role of the private institutions in the development of education industry in India ca...