Effects of Calcination Temperature on the Synthesis, Chemical Structure, and Magnetic Properties of Nano Crystallites Zinc Ferrite Prepared by Combination of Sol-Gel Auto-Combustion and Ultrasonic Irradiation Techniques
Journal Title: International Journal of new Chemistry - Year 2018, Vol 5, Issue 4
Abstract
Nanocomposite zinc ferrites were synthesized using glycine-nitrates by sol–gel auto-combustion technique. The influence of calcination temperatures varying from 400 to 900°C on structural and magnetic properties of spinel ZnFe2O4 powders have been investigated. The characterization measurements including X-ray diffraction (XRD), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM) were performed for as-synthesized zinc ferrite particles. In brief, the effect of calcination temperature on magnetic behavior, demonstrated that, the magnitude saturation magnetization (Ms) and remnant magnetization (Mr) were decreased with the increasing temperature for synthesized samples. In turn, the coercivity (Hc) and the shape of the hysteresis curve are affected significantly by calcination temperature. The coercivity (Hc) is closely related to the microstructure, particle/grain size, shape of the pores of the crystals, and many other complex factors. The calcined sample at 400°C has the best magnetic properties with the highest Ms of 16. 24 emug-1, and with Hc of 102.79Oe (at 10 kOe).
Authors and Affiliations
golrokh Mahmoudzadeh; Saeed Abedini Khorrami
Keywords
Related Articles
- EP ID EP46215
- DOI https://dx.doi.org/10.22034/ijnc.2018.34121
- Views 248
- Downloads 0
Investigation of Adsorption Enthalpy of Prolin on the Surface of Graphene with and without Si: A DFT Study
The project is comparing three types of calculation derived graphene. To evaluate the effect of silicon element to Thermochemistry parameters of absorption of prolin in these derivatives. These derivatives of graphene ca...
Computational study of structures and electronic properties of the Catapres on nano structure of fullerene with calculations method
In this report, using computational methods of quantum mechanical the study of structural, electronic and orbitals properties of Catapres on nanostructured fullerenes using software Gaussian 98 is done. At the first...
Determination of Amitriptyline using Bromate-Bromide and two Dyes
Spectrophotometric studies were successfully used in quantitative analysis of Amitriptyline Hydrochloride (ATH) Two new methods using spectrophotometry are described for the determination of (ATH) with potassium bromate...
A Comparative Study of the Carbonyl Positioning Mechanism in the Mn (CO) 5 CH2F and Mn (CO) 5CHF2 Complex through Quantum Chemistry
In this study, quantum computation was performed by density functional theory (DFT) on carbon monoxide CO placement in Mn (CO) 5CH2F and Mn (CO) 5CHF2 complexes, and all structures were geometric optimization and the CO...
The Energetic, Check of Derived Boron Nitride Nano- cage with (HMX) in Different Conditions of Temperature by Density Functional Theory Method
In this study the synthesis of the derivative of boron nitride nano- cages with energetic material (HMX) in different conditions of temperature, density functional theory methods were studied. For this purpose, the mater...