Efficiency of Corrosion Inhibitors on Cathodic Protection System
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY - Year 2014, Vol 8, Issue 3
Abstract
This study is on experiment being carried out to determine the efficiency of in inhibitors on catholically protected medium carbon steel in sea water in Bonny and Ogbokoro in the Niger Delta region of Nigeria. The experiment was conducted using the total immersion technique in a non-flowing media containing sea water inhibited with potassium dichromate, sodium nitrate, ECIO21A, sarvor CK 368, and Kurizets 636. In the course of this research work, Cathodically protected and unprotected medium carbon steel were totally immersed in seawater containing the aforementioned inhibitors differently. Their weight loss, corrosion rate, pH value and corrosion potentials were determined at intervals of 72 hours, over 2016 hours the test lasted. The results obtained shows that inhibitor EC1021A has efficiency of 79.8%, other results are as follows: Kurizet S.636, 77%, savor CK368, 43%, potassium dichromate, 35% and sodium nitrate, 1.88%. It was concluded that EC1021A is the most efficient inhibitor, under a non-flow system.
Authors and Affiliations
Tobinson Briggs , obioma M. Eseonu
Keywords
Related Articles
- EP ID EP121268
- DOI -
- Views 107
- Downloads 0
A Comparative Study of the Suitability of Dakuk, Kirkuk-Iraq and Tuz, Salahaddin-Iraq Coarse Aggregates for Construction Purposes
This paper investigates the properties of some natural coarse aggregates in Dakuk and Tuz. Two gravel samples were obtained from different locations and transported to Civil Engineering Laboratory, Technical Institute of...
Research on the Characteristics of Electro-hydraulic Proportional Steering System in Self-Propelled Modular Transporter
According to the steering mode of self-propelled modular transporter, the key component of the steering system with electro-hydraulic proportional directional valve was designed. The model of the transporter steering sin...
Finite Element Analysis of Pressure Vessel and Piping Design
The main objective of this paper is finite element analysis of pressure vessel and piping design. Features of multilayered high pressure vessels, their advantages over mono block vessel are discussed. Various param...
CFD Analysis of Pressure Coefficient for NACA 4412
in this paper NACA 4412 airfoil profile is considered for analysis of wind turbine blade. Geometry of the airfoil is created using GAMBIT 2.4.6. And CFD analysis is carried out using FLUENT 6.3.26 at various angles...
Automated Anomaly and Root Cause Detection in Distributed Systems
It is a challenging issue to identify a defective system in a large scale network. The data collected from the distributed systems for troubleshooting is very huge and may contain noisy data, so manual checking and...