Eigenmodes analysis of sectoral coaxial ridged waveguides by transverse field-matching technique. Part 2. Results

Abstract

Introduction. The goals of the research presented in the paper are defined. The geometrical configurations of sectoral coaxial ridged waveguides are shown. Cutoff wave numbers. The results of calculations of cutoff wave numbers multiplied by the outer radius of sectoral coaxial ridged waveguide with a ridge on an inner or outer wall obtained by transverse field-matching technique and integral equation technique are shown for the first four modes. The deviation between the results for cutoff wave numbers obtained by these two techniques is less than 0.5 %. Solutions convergence for electric field components distributions. The convergence analysis of electric field components distributions depending on the amount of partial modes is carried out. It is shown, that for correct calculation of sectoral coaxial ridged waveguides field distributions by transverse field-matching technique one should utilize more than 30 partial modes. Electric field components distributions. The electric field distributions in sectoral coaxial ridged waveguides of both configurations are investigated for the first four modes. All electric field components distributions computed by transverse field-matching technique are in good agreement with the ones obtained by integral equation technique with correct account of the singular field behavior at the ridge. This confirms the correctness of the results obtained. Conclusions. General conclusions of the paper are given. 

Authors and Affiliations

F. Dubrovka, S. Piltyay

Keywords

Related Articles

Rake-receivers in the modern telecommunication systems

The evolution of the systems is considered with the code division. It is investigational principles of construction and work of Rake-receiver, and also changes which bring in the new standards of connection in a receiver...

Radiation of the thin-walled circular waveguide aperture at co- and crosspolarization

It is shown that width of main lobe of copolar field of а circular waveguide aperture closely to the exact method of factorization can be calculated by Fourier method and Kirchhoff-Huygen method. It is not advisable to u...

Modeling of eigenoscillations coupled detuned dielectric resonators

An electrodynamic model of the detuned Dielectric Resonators’ (DRs) system has been proposed. A new equation system connecting frequencies and resonator' amplitudes has been obtained. The Coupled oscillations law of two...

Development concept of specialized software for distributed information-computational systems

Describes the concept of development for the wireless distributed information-computational system. Its work is based on the use of distributed documents in the form of simplified configuration files. Their content is de...

Microwave antennas, based on dielectric resonators circular arrays

It’s examined 2-D structures, representative by a cylindrical Dielectric Resonator (DR) system, situated on the planar metal surface around active irradiator, coupled with microwave line. Every DR becomes excited on it l...

Download PDF file
  • EP ID EP309034
  • DOI 10.20535/RADAP.2013.55.13-23
  • Views 47
  • Downloads 0

How To Cite

F. Dubrovka, S. Piltyay (2013). Eigenmodes analysis of sectoral coaxial ridged waveguides by transverse field-matching technique. Part 2. Results. Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування, 0(55), 13-23. https://europub.co.uk/articles/-A-309034