ELECTROCHEMICAL AND SPONTANEOUS PASSIVATION OF THE CoCr ALLOY AS CORROSION PROTECTION
Journal Title: Applied Engineering Letters - Year 2017, Vol 2, Issue 1
Abstract
The aim of this work was to compare the level of protection of spontaneous and electrochemical passivation of the CoCr alloy against corrosion in environment simulating the conditions prevailing in the mouth. Passivation layer was obtained as spontaneous in air at 23 °C for 1 and 24 hours and by electrochemical method by polarization at potentials 0 and 100 mV for 1 and 24 hours. The corrosion resistance tests was realized by potentiodynamic method in Fusayamya saliva solution. Based on realized research it was concluded that electrochemical passivation better protects material from corrosion than passivation in air; extending the electrochemical passivation time results in greater corrosion resistance and higher passivation potential and longer time was related to formation of a thicker protective layer on the material's surface.
Authors and Affiliations
Łukasz Reimann
Keywords
Related Articles
- EP ID EP222912
- DOI -
- Views 88
- Downloads 0
LEAN METHODOLOGY AND ITS DERIVATES USAGE FOR PRODUCTION SYSTEMS IN MODERN INDUSTRY
With lean methodology usage being the only way to stay competitive on nowadays market, it is important to implement it and spread it through the organization. In this paper, purpose of lean is explained, the most importa...
AN ENERGY CONSUMPTION ANALYSIS ON PUBLIC APPLICATIONS IN THE CITY OF NOVI SAD
The aim of the paper was to analyse energy efficiency indicators of energy consumption over public buildings in the territory of the City of Novi Sad. Also, the paper analyses the costs of energy and water consumption, a...
INFLUENCE OF USING DISCRETE CROSS-SECTION VARIABLES FOR ALL TYPES OF TRUSS STRUCTURAL OPTIMIZATION WITH DYNAMIC CONSTRAINTS FOR BUCKLING
The use of continuous variables for cross-sectional dimensions in truss structural optimization gives solutions with a large number of different cross sections with specific dimensions which in practice would be expensiv...
FUZZY SUPPORT MODEL FOR LONG PIPELINES BY USING DB2 APPROACH
Transient in long pneumatic lines is analyzed from time delay and construction view of point. After presented mathematical model of pneumatic system, there are shown stability issues, and it is calculated length of the p...
COMPARISON OF HEAT EXCHANGERS ACCORDING TO THE SHAPE OF RIBS
In this paper the lamella heat exchangers were presented. They are used for water and air as operating mediums, and can be differentiated by the shape of the ribs. The one has sinuous type of ribs, while the other one ...