Electroless Ni–B Coating of Pure Titanium Surface for Enhanced Tribocorrosion Performance in Artificial Saliva and Antibacterial Activity
Journal Title: Tribology in Industry - Year 2017, Vol 39, Issue 2
Abstract
In the present study, the surface of commercial pure (Grade 2) titanium was coated with electroless Ni–B. The surface morphology, microstructure and phase identification were analysed by X-Ray Diffraction (XRD) and Field Emission Gun Scanning Electron Microscope (FEG-SEM) equipped with Energy Dispersive X-ray Spectroscopy (EDS). The tribocorrosion performance in a laboratory simulated artificial saliva was investigated using a reciprocating ball-on-plate tribometer coupled to an electrochemical cell. The antibacterial property of the electroless Ni–B film coated on pure titanium was basically investigated. From this study, it may be concluded that this electroless Ni–B coating process cannot only improve the hardness and tribocorrosion performance of the pure titanium, but can also provide antimicrobial activity.
Authors and Affiliations
F . Mindivan, H . Mindivan, C . Darcan
Keywords
Related Articles
- EP ID EP228748
- DOI 10.24874/ti.2017.39.02.15
- Views 77
- Downloads 0
The Influence of the Relative Sliding on the Surface Quality
This paper presents a study on the surface quality pointing out the influence of relative sliding on the topography parameters. Traditional roughness parameters as Ra and Rq, deal only with relative high of the asperitie...
Tribological Behavior of Journal Bearing Material under Different Lubricants
The friction and wear behavior of journal bearing material has been investigated using pin on disc wear tester with three different lubricating oils i.e. synthetic lubricating oil (SAE20W40), chemically modified rapeseed...
Erosion-corrosion Behaviour of Dual Phase Medium Carbon Steel using a Designed Slurry Pot
A slurry pot has been designed, fabricated and evaluated for erosion-corrosion investigations. A variable voltage controller was used to vary the input voltage into the one-horse-power motor that controls the slurry pot....
Analysis of Tribological Behaviour of Functionally Graded LM13 Aluminium/TiS2 Composite Using Design of Experiments
Functionally graded LM13 aluminium/10wt% TiS2 composite was fabricated by centrifugal casting method and hollow cylindrical part has the dimension of 150x150x20 mm was obtained. The microstructural evaluation and vicker’...
Flammability Tests on Hot Surface for Several Hydraulic Fluids
Industrial equipment using hydraulic fluids are design to accept higher load and speed, implicitly higher temperatures, including for fluids. Leakages from enclosures like gear boxes or hydraulic systems could increase t...