Electrolytic Preparation of Al-Sm Alloy in SmF3-LiF-Sm2O3 Molten Salt System
Journal Title: Materials Science-Medžiagotyra - Year 2019, Vol 25, Issue 4
Abstract
In the present paper, an Al rod as liquid cathode was added into the SmF3-LiF-Sm2O3 molten salt system and subsequently the Al-Sm alloy was prepared by the liquid cathode electrolysis method. The effects of electrolysis temperature, cathode current density and electrolyte composition on the current efficiency were studied. The results demonstrated that the maximum content of Sm in the Al-Sm interalloy could reach up to 32.8 wt.%, whereas the alloy was mainly composed of the Al substrate, Al4Sm and Al3Sm phases. The current efficiency increased first subsequently decreased as the electrolysis temperature and cathode current density increased. Simultaneously, the electrolyte composition had a high impact on the current efficiency. When the mass ratio of SmF3and LiF was 4, the current efficiency was 62.8 %.
Authors and Affiliations
Xiaolian ZHANG, Chubin YANG, Hongxia LIU, Guanghuai PENG
Keywords
Related Articles
- EP ID EP674932
- DOI 10.5755/j01.ms.25.4.20437
- Views 52
- Downloads 0
The Regeneration Cycle of Cobalt Chemical Conversion Waste Liquid on Aluminum Alloys
In this research, the regeneration cycle of cobalt chemical conversion waste liquid, the effects of oxidizing agents on solution service life, and the influence of oxidizing agents on the treatment of waste liquid was st...
Influence of Drying Temperature on Tensile and Bursting Strength of Bacterial Cellulose Biofilm
The article presents an experimental study of mechanical properties of cellulose biofilm produced by bacterial fermentation process. Naturally derived biomaterial has great current and potential applications therefore th...
The Effect of Nanoparticle Surface State on Trap Level Distribution of Polyimide/Aluminum Nitride-montmorillonite Nanocomposite Films
The electrical properties of polyimide (PI) nanocomposites, which are widely used in microelectronic industry and electrical engineering fields, strongly depend on the surface state of nanoparticles. To explore this depe...
Synthesis, Characterization and Blood Based Toxic Effects of Superparamagnetic Nanoparticles
The objective of this study is to the assess toxicity of superparamagnetic nanoparticles within normal and diabetic human blood groups using complete blood count (CBC). For this purpose, iron oxide nanoparticles (IONPs)...
Characterization, Production and Microwave Absorbing Properties of Polyaniline-NiFe2O4: Tb Composites
In this study, terbium-doped NiFe2O4 was produced by using mixed oxide technique. The Ni1-xTbxFe2O4 composition was synthesized and x was selected as 0.025, 0.050 and 0.070, respectively. The single phase Ni ferrite was...