Electromagnetic Field Analysis of Dual-power Traction Power Supply System in Rail Transit Depot under AC-DC Switching Power Supply Mode
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 8
Abstract
Objective The AC-DC (alternating current-direct current) dual-power traction power supply system depot features densely distributed tracks and relatively close catenary clearance. Different power supply modes can affect the distribution of electromagnetic fields in depot spatially. Therefore, it is necessary to analyze the electromagnetic field of rail transit depot dual-power traction power supply systems under AC-DC switching power supply mode. Method Taking the Shuangfu Depot on Tiaodeng-Jiangjin Line of Chongqing City Railway as the basis, a simulation model of depot AC-DC dual-power traction power supply system is constructed using CDEGS software, and the characteristics of spatial electric and electromagnetic field intensity distribution in the depot under different operating conditions are analyzed. Regarding the abnormal voltage phenomenon on catenary in depot garages, the impact of electromagnetic field spatial distribution in dual-power traction power supply system depot on the induction voltage of catenary is comprehensively evaluated, and corresponding suppression measures are proposed. Result & Conclusion Under both AC and DC power supply modes, the spatial electric field of catenary is symmetrically distributed around the charged conductors in general, but the spatial magnetic field is not entirely symmetrically distributed. The more charged conductors there are, the greater intensity of spatial electric and electromagnetic fields. Under AC power supply mode, the magnitude of static induction voltage of surrounding conductors is related to the spacing between conductors and the voltage. Electromagnetic induction voltage is proportional to current. When using DC power supply mode, the conductor static induction voltage under various working conditions all exceeds the human safety limit of 36 V.
Authors and Affiliations
Jiang XING, Jinyu ZHAO
Keywords
Related Articles
- EP ID EP742683
- DOI 10.16037/j.1007-869x.2024.08.012
- Views 44
- Downloads 0
Analysis of Train Operation Efficiency of Urban Rail Transit Based on Train-to-train Communication Train Control System
[Objective] The T2T (train to train) communication train control system in urban rail transit is a new type of signal system, and it manages and controls trackside equipment through resource management. To verify the sup...
Signaling System Fully Redundant On-board Architecture Suitable for TACS
Objective The signaling system of Shanghai Rail Transit Line 3 and Line 4 can no longer meet the requirements of high-density and high-reliability networked operation, necessitating an upgrade to TACS (train autonomous c...
Application of Visual Three-Position Isolation and Grounding Integration Device Replacing Visual Grounding Device
［Objective］ Disconnector is a key equipment in rail transit traction power supply system. With the development of intelligent switch equipment technology and the increasing demand for intelligent operation and maintena...
Effect Analysis of Track Vibration Reduction Measures on Viaduct Environmental Vibration Induced by Vehicle Operation
［Objective］ When a train running on the viaduct track, the rail vibration caused by the vehicle-track interaction will be transmitted to the bridge, piers, and pile foundations through the track structure, thereby trig...
Research and Application of Track Misalignment APM Detection Technology
Objective In order to solve the problems of low efficiency and poor precision of traditional APM (automated people mover system), it is necessary to study the APM technology for track misalignment detection. Method The l...