Electron microscopic study of the soil-containing material structure with waste usage
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2018, Vol 1, Issue 71
Abstract
The waste amount decreasing is an actual problem for the modern society. The waste products are accumulated around big cities or enterprises and create a zone of the economic and social discomfort. One of the ways of this problem solution is the waste usage as raw materials for construction. In this article the posible usage of slags and activated sludge of biological treatment plant of town sewage for the ground stabilization is considered. The samples consist of clay, metallurgical slags and activated sludge. They are studied by the electron microscopy method to define the changes of sample microstructures with activated sludge and without it. The research showed the difference between microstructures. It is shown that the samples with activated sludge are characterized as more dense and strong structure. It is explained that an organic component of activated sludge is an anionic surfatant which is adsorbed on the particle surfaces of slag and clay. Moreover, an inorganic component of activated sludge is represented by oxides which can activate the slags. Mainly, the hydratation products of slag were observed on the electron microscopic photos of these samples. The conclusion is made that activated sludge could be an alkaline activator for slags.
Authors and Affiliations
V. Yu. , Savchuk
Methodology of creation of territorial zoning maps based on characteristic values of climatic loads
The cartographic method of territorial zoning of climatic loads consists in division of territory into several regions with district values close to the biggest characteristic load value in the given territorial area. It...
Renewal of air conditioning system of manufacturing premises
An important priority of the economic policy of Ukraine is the careful use of energy. Therefore, a large-scale energy saving policy is being implemented in the country, and energy efficiency objectives are comprehensive...
Influence of quantity and quality of the filler on technological damage of beam samples
The influence of the quantity and quality of the filler on the technological damage of beam samples is considered in the article. Physical and technical properties of composite building materials and structures are large...
The pipeline monitoring
Experience of monitoring of high pressure gas pipeline laid on steep slope area above the underground workings is outlined. For research the geodetic reference network consisting of four points was established on the sit...
Modeling of intellectual support system for decision-making on technical regulation in building
One of the ways to solve the problems of increasing the speed and reliability of the functioning of expert systems is the development of software tools the work of which is based on the concept the knowledge base usage....