Empirical Study on the Main Physical Items of Nano Oil in an Isolated Vertical Pipe
Journal Title: Scholars Journal of Engineering and Technology - Year 2017, Vol 5, Issue 3
Abstract
Finding the properties of crude oil after addition of nano particle is considered in this work. Results are shown in Figures indicate on the positive effect of nano particles in the oil sweetening processes. The amount of H2S removal increases about 0.19 and 0.11 for both oil types of heavy and light, respectively. Temperature varies in range of 80 C to 120 C and pressure is adjusted between 50 atm to 250 atm. Addition of nano particle shows the decrease in the amount of viscosity about 70% and 50% for light and heavy oil, respectively. However, nano particle in oil doesn't improve the recovery percentage and also asphalting precipitation. Due to the results, the optimums of properties can be evaluated. Ultimately, the experimental results show the effect of addition of nano particle in the percentage of oil recovery versus the input energy for sample A and sample B, respectively. Keywords: Nano; Petroleum; Hydrogen sulfide; Light; Heavy; Properties.
Authors and Affiliations
Mohammad Yaz, Farshad Farahbod
Keywords
Related Articles
- EP ID EP385498
- DOI -
- Views 62
- Downloads 0
An Innovative Approach in Steganography
The secure data transmission over internet is achieved using Steganography. In this paper, a new algorithm based on the CPT- has been proposed for data hiding in a image. Here, no is used key for embedding and extracting...
A Survey of Performance based Advanced Rapid Prototyping Techniques
Rapid prototyping is a group of techniques used to quickly fabricate a scale model of a physical part or assembly using three-dimensional computer aided design (CAD) data. Construction of the part or assembly is usually...
Configuration Research of Centering Device Effected by Viscoelastic Fluid
The polymer flooding can improve the oil production at the late stage of oilfield development but this viscoelastic behavior of the polymer solution will cause sucker rods eccentric wear and break off., which can shorten...
Problem of Transport Network Analysis for Identifying Bottlenecks
Abstract:The analysis was done and an algorithm was developed for calculating a route in the urban transport network. Based on the input data, this algorithm determines the capability to pass the given flow between two p...
Experimental Investigation of Filament Wound Pressure Vessel Subjected to Internal Pressure by Finite Element Method.
Composite pressure vessels are an important type of high-pressure container that is widely used in aerospace industries. When compared with isotropic materials like steel, these pressure vessels develop hoop stresses tha...