Energy and Exergy Analysis of a Coal Fired Power Plant
Journal Title: Mehran University Research Journal of Engineering and Technology - Year 2018, Vol 37, Issue 4
Abstract
In this paper, energy and exergy analysis has been conducted on a subcritical coal fired power plant of Wisconsin Power and Light Company, USA to investigate the steam cycle energy and exergy efficiency. The cycle is analyzed by developing a mathematical model using its operating and design parameters. The analysis is performed using EES (Engineering Equation Solver). The energy analysis shows that major share of energy loss occurs in condenser i.e. 72% of total cycle energy loss, whereas, exergy analysis shows that 83.09% total exergy destruction of cycle occurs in boiler.Furthermore, the simulation results are compared with actual with an absolute error of 3.1%. Additionally, the parametric study is performed to examine the effects of various operating parameters such as main steam pressure and temperature, condenser pressure, terminal and drain cooler temperature difference on net power output, energy and exergy efficiency of cycle. The parametric study shows that the plant has maximum energy and exergy efficiencies at steam pressure of 2500psi, condenser pressure of 1.0psi and main steam temperature of 1100oF. Furthermore, these parameters do not seem to change energy and exergy efficiencies significantly.
Authors and Affiliations
Sumit Kumar, Dileep Kumar, Rizwan Ahmed Memon, Majid Ali Wassan, Mir Sikandar Ali
Nonholonomic Mobile Robot Trajectory Tracking using Hybrid Controller
A control scheme is being presented for the trajectory tracking of a nonholonomic kinematic model of mobile robots. As a kinematic model of mobile robots is nonlinear in nature, therefore, it is controlling is always bei...
Effect of Compaction on Compressive Strength of Unfired Clay Blocks
This study investigates the possible use of unfired compacted clay blocks as a substitute of CSEB (Compressed Stabilized Earth Blocks) for the construction of economical houses. Cubes of 150 mm size were cut from the cla...
A New Hybrid Metaheuristic Algorithm for Wind Farm Micrositing
This work focuses on proposing a new algorithm, referred as HMA (Hybrid Metaheuristic Algorithm) for the solution of the WTO (Wind Turbine Optimization) problem. It is well documented that turbines located behind one ano...
Image Quality Meter Using Compression
This paper proposed a new technique to compressed image blockiness/blurriness in frequency domain through edge detection method by applying Fourier transform. In image processing, boundaries are characterized by edges an...
Investigations into the Sequential Application of Crease Resist Finish, Tannin and Cationic Reactant to Improve the Resistance of Sulphur Dyes to Oxidation
The importance of sulphur dyes are realized due to the fact that they offer an economical method of achieving dyeing of good color strength and acceptable fastness on cellulosic substrates. However, the main limitations...