ENERGY EFFICIENCY OF LIFE PROTECTION OF SYSTEMS FOR RAILWAY VEHICLES

Abstract

Passenger cars consume a fairly significant share of electricity to create comfortable conditions, when transporting passengers. The conducted studies of energy efficiency improvement taking into account the results of mathematical modeling of thermal processes it was established that during the design of passenger cars designers do not take into account a number of factors, affecting energy efficiency life support systems for passenger cars. In the calculations of the thermal balance of the car only heat is taken into account, supplied by heating pipes for more accurate calculations thermal balance of a passenger car the given heat must be taken into account in the thermal balance of the car. Experimental measurements confirmed presence zones of temperature fields with different temperature modes, separated by a decorative ceiling in which the zone of constructive ceiling cavity overheats over the normative indicators. This leads to increased heat loss through the roof of the carriage. In particular, it has been established that the proposed modernization on increasing the energy efficiency of the heating system can be implemented at relatively low cost, in the conditions of existing carriages depot, which will reduce energy consumption for heating 13.4% or UAH 25.9 million for a year. Improved mathematical model non-stationary thermal regime of a passenger car allows comprehensive analysis thermal processes of a passenger car, taking into account its constructive changes by mathematical experiment. Thus, this study will allow not only to increase energy efficiency but also provides grounds for reducing the power of the heating system by at least 10%, which will reduce the metal content of the heating system and, as a consequence of the reduction of the wagon's packaging, reduction of power of electric devices, wires, and the number of electrically heated TENs will decrease.

Authors and Affiliations

Eduard Biloshytskyi

Keywords

Related Articles

METHODOLOGY FOR DETERMINING BORDER VALUES OF PARAMETERS OF THE TECHNICAL CONDITION OF NODES OF HIGH SPEED WAGONS

In the process of operation, the structural parameters of the parts change, which leads to a deterioration in the technical condition of the unit and the car as a whole. Changing the structural parameter of the car's det...

MODERN DIRECTIONS OF AUTOMATION OFTRAIN DISPATCHING ON THE RAILWAYS OF THE WORLD AND PERSPECTIVES OF THEIR IMPLEMENTATION IN UKRAINE

In this work the existing directions of automation of train traffic dispatching on the railways of the world and possibilities of their introduction on the railway transport of Ukraine are investigated. Following the exa...

MATHEMATICAL MODEL OF INTERACTION OF WAY AND MOBILE COMPOSITION IN AREA OF RAIL JOINTS

A mathematical model characterizing work of rails under action of the vertical loading from mobile composition on the areas of way direct and crooked is developed, and also on the areas of the found in an area rail joint...

RESEARCH EFFECT OF THE RESERVE TIME RELIABILITY HIGHT SPEED TRAIN SCHEDULE

The work is devoted to research the effect of reserve time between trains on the reliability of the train schedule. In terms of implementation speed movement in Ukraine determination of this value is of particular releva...

NUMERICAL INVESTIGATIONS OF DYNAMIC TRANSVERSE FORCES IN CURVES, IN THE ZONES OF RAILS VARIETIES

The purpose of the work is to identify, by numerical methods, the causes of intensive lateral wear of rails and other bounces of the track in curves of small radius. The research has been carried out for the most mass ty...

Download PDF file
  • EP ID EP415269
  • DOI 10.18664/1994-7852.179.2018.147709
  • Views 52
  • Downloads 0

How To Cite

Eduard Biloshytskyi (2018). ENERGY EFFICIENCY OF LIFE PROTECTION OF SYSTEMS FOR RAILWAY VEHICLES. Збірник наукових праць Українського державного університету залізничного транспорту, 179(13), 13-25. https://europub.co.uk/articles/-A-415269