Engineering geological evaluation of some rocks from Akure, Southwestern Nigeria as aggregates for concrete and pavement construction
Journal Title: Geology, Geophysics & Environment - Year 2019, Vol 45, Issue 1
Abstract
The importance of rocks and rock aggregates cannot be overemphasized in construction and concrete design globally. This study evaluated the physical and mechanical characteristics of fine grained granite, porphyritic granite, quartzite, granite gneiss, migmatite gneiss and charnockite from ten different locations in Akure for their suitability as construction materials. Field observation, water absorption, specific gravity, shape indices, aggregate impact value (AIV), aggregate crushing value (ACV), Los Angeles abrasion value (LAAV), compressive strength, tensile strength and petrography of the selected rocks were evaluated. The field studies indicate fresh outcrops with little signs of weathering. Porphyritic granite shows a higher water absorption value >1%, suggestive of its unsuitability as foundation materials in water logged areas. The higher flakiness and elongation indices of porphyritic granite, quartzite and migmatite gneiss are detrimental to the higher workability and stability of mixes. AIV (14.79–23.52%), ACV (18.32–28.93%) and LAAV (25.22–34.55%) showed that granite, granite gneiss and charnockite have good soundness and hardness with greater resistance to wear. Higher strength values of all the rocks were found to be satisfactory for use in the production of aggregates for civil constructions. Petrographic analysis revealed similarities in the compositions of the rocks, with quartz being the dominant mineral. The results show that all the rock types possess the required quality standards for use as construction aggregates in highway pavements and foundations. Some of the aggregates (GG1, GG2, GF, GC, MG1, CK1 and CK2) are also suitable for bituminous mixes. Quartzite should be avoided in load bearing masonry units due to its lower strength values. The most suitable rocks proven as road and building stones are fine grained granite, granite gneiss and charnockite because of their low water absorption, low flakiness and elongation indices, low abrasion values, higher strength values (tensile strength and unconfined compressive strength) and sound petrographic characters. Thus, adequate knowledge of rocks and rock aggregates is crucial in order to prevent continuous structural failure around the globe and make the environment friendlier.
Authors and Affiliations
Omowumi Ademila
Keywords
Related Articles
- EP ID EP572622
- DOI 10.7494/geol.2019.45.1.31
- Views 76
- Downloads 0
Perspectives of geothermal water use in the Podhale Basin according to geothermal step distribution
At present, hydro-geothermal resources in which waters in bores are the carrier of heat energy have commercial importance in Poland. Geothermal waters should feature the highest possible temperature in the outflow, low m...
Sorption of organic compounds by organo-zeolites
Organic compounds such as BTEX and PAHs are one of the most common contaminants in water system. These contaminants would take decades to degrade and they have harmful effects on human health (Qin et al. 2008). Several t...
What can be learned about the deposition and compaction of peat from the Miocene lignite seam exposed in the Chłapowo Cliff on the Polish coast of the Baltic Sea?
This study focuses on discussing the relationship between the accumulation of peat and its compaction in the overbank zone of the Miocene river system. The examined 2nd Lusatian lignite seam is characteristically interbe...
Structural and textural response to dynamics of fluvioglacial processes of the Rzymsko esker sediments, Central Poland
The study was conducted in the Rzymsko esker, in the Eastern part of the Turek Upland Plain, within the range of the Warta Glaciation (Saalian II). The form was accumulated in a tunnel valley, which was partially filled...
3-dimensional surface magnetic susceptibility distributions with depth to investigate anthropogenic pollutants boundary in Abuja Metropolis
Changes in the magnetic susceptibility of topsoil, especially in urban areas, are greatly affected by the deposition of anthropogenic metallic dust arising from industrial activities, the burning of fossil fuels, car wea...