Enhancement of a Boil-off Gas Re-liquefaction System with Cascade Cycle

Abstract

For marine use, outward compressors are found just on circulating air through and cooling commitments, as they are not adequately versatile for the extent of working conditions essential for payload operations. However some modification of farthest point is required despite for circulating air through and cooling commitments, and a standout amongst the best techniques for diminishing cut-off is by the use of portable channel oversee valves. Distinctive methodologies fuse use of a damper valve in the suction pipe, speed assortment, or "hot gas evade" which incorporates a piece of the discharge gas from the compressor being driven directly to the evaporator, bypassing the condenser. If the farthest point control is an adequately planned modified system, it will continuously keep the compressor within an appealing reach. In case confine inspection manually by then personality must be taken not to set the control at too much magnificent a deviation from the layout perfect. In fact, this has not done there is a credibility of backing off of the bleeding edges of the compressor with coming about surging or vibration.

Authors and Affiliations

YESHWANTH RAJ

Keywords

Related Articles

Characterization of Structural Properties and Harden Enhancement of Al-Cu-N by Thin Film Coating

Two series of Al-Cu-N films containing Cu were grown by DC / RF magnetron sputtering of two elemental targets in an Ar / N & sub2; Gas mixture deposited by biasing a high-speed steel substrate. The effects of Cu content...

Buckling Analysis of Thin Frp Laminate Under Combined Thermal and Mechanical Loading

Thermal environment influences the buckling behavior of structures, in addition to the mechanical loads acting on it. The present work aims to predict the buckling load factor of thin FRP laminates subjected to pressure...

The Design and Fabrication of a Compound Die to Make Hexagonal Washer

Many parts and components used in mechanical industry are manufactured by cold pressing operations. Die is the main tool in these operations. There are different types of dies like progressive die, compound die and combi...

Design and Implementation of Zeta Micro-Inverter for Solar PV Application

Microinverter is attached on each photovoltaic (PV) panel, i.e., Microinverter is improving due to increased energy harvest from the solar panel. This paper proposes a design and implementation of a single stage ZETA Mic...

Experimental Investigation on Thin Sheets of SS316L in Gas Tungsten Arc Welding Process

The grades of stainless steel have several applications such as aerospace, medical, power plants, and automobile industry. Especially stainless steel 316L (SS316L) has been successfully utilized in many sectors because o...

Download PDF file
  • EP ID EP280275
  • DOI 10.24247/ijmperdfeb201894
  • Views 107
  • Downloads 0

How To Cite

YESHWANTH RAJ (2018). Enhancement of a Boil-off Gas Re-liquefaction System with Cascade Cycle. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ), 8(1), 817-822. https://europub.co.uk/articles/-A-280275