ENSURING STABILITY COMPATIBLE WORK OF THE DIFFERENT ASYNCHRONOUS MACHINES IN THE AUTONOMOUS ELECTROMECHANICAL COMPLEX
Journal Title: Енергетика і автоматика - Year 2018, Vol 0, Issue 3
Abstract
An autonomous electromechanical complex is a partial version of an autonomous electric power system with electric machines as a source and consumer of electricity. Realization of idea of replacement of difficult synchronousgenerator on more simple reliable and relatively a cheapautonomous asynchronous generator with the short-curcuit rotor is done by impossible by the row ofthe difficulties predefined by the general lacks of asynchronous machines, in particular, by the necessity of separate source of reactive-power for the off-line system with an autonomous asynchronous generator. On the example of calculation and analysis of descriptions of physical model of autonomous electromechanics complex the shown possibilities and terms of compatible work of asynchronous generator and motor of comperative power are at the different variants of capacity excitation The distribution of capacities in asynchronous generator and motor for individual branches of the electrical circuit, unconnected conditions ferroresonance voltages was proposed to ensure the stable work of the dissimilar conditions in machines of comparable power in the autonomous electromechanical complex. Unlike other autonomous complexes with asynchronous machines only a complex is generalized compensated anautonomous asynchronous generator plus an asynchronous motor appears capable of working in the modes of starting and acceleration of asynchronous motor of comperative with the generator of power. Such starting comes true at the tripleincrease of total capacity of excitation by comparison to hersize for the normal mode.
Authors and Affiliations
В. І. Мішин, С. С. Макаревич, Р. М. Чуєнко
Keywords
Related Articles
- EP ID EP326636
- DOI -
- Views 77
- Downloads 0
THE USE OF THE BARK AS AN ENERGY RESOURCE IN THE COMPOSITION OF PINE WOOD PELLETS
The influence of the bark content in pine pellets on their mechanical strength is studied. It is shown that wood pellets made from bark and branches have static bending strength compared with standard samples made of saw...
EXPERIMENTAL DETERMINATION OF HEAT OF COMBUSTION OF FUEL
A step-by-step technology for determining the main indicator of the fuel's energy value is presented, namely, obtaining the lower heat of combustion of the fuel mass, taking into account the acid formation. The technique...
СУЧАСНИЙ СТАН ПРОБЛЕМИ БОРОТЬБИ З ВАРРОАТОЗОМ БДЖІЛ
Мета дослідження – аналіз існуючих напрямків боротьби з варроатозом як в Україні, так і за її межами. Представлено сучасний стан проблеми боротьби з варроатозом у галузі бджільництва, як в Україні, так і за її межами. Пр...
OPTIMIZING FOR SPEED AUTOMATIC FREQUENCY CONTROL OF QUARTZ CRYSTAL OSCILLATOR FOR SYNCHRONIZING SIGNAL CONTROL SYSTEMS
Actual in today's conditions is the development, research and optimization of hardware and software to create an effective system for automated monitoring of clock signals, which are used in high-tech systems of various...
ПОВЕРХНЕВА ЕНЕРГІЯ ЗАХИСНО-ЖИВИЛЬНИХ РОЗЧИНІВ ЯК ФАКТОР ВПЛИВУ НА ЕФЕКТИВНІСТЬ ОБРОБКИ ОБ’ЄКТІВ РОСЛИННОГО ПОХОДЖЕННЯ
Розглянуто питання інтенсифікації та підвищення ефективності індукційного способу нанесення захисно-живильних розчинів на об’єкти рослинного походження. Метою проведених досліджень було розробка заходів з підвищення ефек...