ESTIMATION OF RELIABILITY OF PROTIOUGINNIH SYSTEMS OF SUBRAIL BASIS WITH THE USE OF MATHEMATICAL DESIGN
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2017, Vol 169, Issue 3
Abstract
In work the questions of remontoprigodnosti are examined, longevity and safety of work of constructions at the calculation modes of exploitation, to provide their normal functioning. For terms, that are examined, reliability of the protivougonnoy system in the flow of time of its exploitation is determined taking into account probability of faultless work of the system during a certain period, taking into account the normative value and probability of safe work. To characterize every knot of the intermediate clamping of mogna by the size of longitudinal communication of rail with a railroad tie. The size of longitudinal force of pressure of rail on the knot of clamping, by chance changing in the process of work, can attain a critical mark, which the refusal of knot of clamping can happen at. At the refusal of some knots of clamping the protiugonnaya system remains capable of working, because in her there are surplus elements. For resistance of rails to the longitudinal moving, in relation to subrail supports, that is for prevention of their driving away, on the main ferrous road the «protivougonnie systems» which are the aggregate of knots of the intermediate clamping are widely used. In work a logical chart is considered for the calculation of reliability of the protivougonnih systems and the analysis of their refusals at any state of the protivougonnoy system is executed.
Authors and Affiliations
Natalya Bugaec, Pavlo Plis, Vladimir Nikishin
Keywords
Related Articles
- EP ID EP310837
- DOI -
- Views 64
- Downloads 0
STUDY OF COMPREHENSIVE CHEMICAL ADDITIVES, PROVIDING A PERMEABLE ACTION ON PHYSICAL AND MECHANICAL PROPERTIES REPAIR COMPOSITION BASED BINDER SHLAKOLUZHNOHO
The article is devoted to the substantiation of the non-cement composition of penetrating action on the basis of blast furnace granulated slag and sodium silicate. The results of the investigation of the influence of the...
DEVELOPMENT OF EQUIPMENT FOR DISTRIBUTION DEVICES POWER TRACTION ELECTRIC SUPPLY. PART I
It’s presented review of state and development technologies, technical parameters and characteristics modern basic type equipment in the distributive devices for traction power supply systems: complete block technologies...
IMPROVING THE EFFICIENCY OF HIGH-SPEED RAILWAY THROUGH THE USE OF THE DC OVERVOLTAGE
The majority of CIS railways are electrified on DC with a voltage in the contact network of 3 kV. However, such a voltage is not optimal either for power supply devices or for electric rolling stock. It is a compromise s...
AUTOMATED SYSTEM OF SELECTION MULTIPLE UNITS ROLLING STOCK ROLLING STOCK FOR CONVERSION TO HYDROGEN FUEL
The article considers options for using hydrogen as a fuel for multiple units rolling stock in Ukraine. An analysis was made of the rolling stock with its use in Japan and Germany. Considered fuel-economic indicators of...
DETERMINATION OF THE RATIONAL LOCATION FOR A PASSENGER STATION SERVING HIGH-SPEED TRAINS IN A LARGE RAILWAY JUNCTION
The scientific approaches concerning calculation and optimization of high-speed lines parameters were analyzed. The analysis showed that the issue of rational location of passenger stations for the servicing of high-spee...