EVALUASI KONDISI MESIN BUBUT HARIZON T300 MENURUT METODE SCHLESINGER SEBAGAI ACUAN DALAM MELAKUKAN TINDAKAN PERAWATAN
Journal Title: SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin - Year 2018, Vol 12, Issue 2
Abstract
To ensure that a lathe still has a high performance and accuracy, it is necessary to evaluate the condition of the machine. The results of the evaluation are not only used to determine the performance and accuracy of the machine but more than that can be used to determine the maintenances and repairs actions more precisely, therefore the condition of the machine can be returned to a better state. The aims of the reserach was to evaluate the condition of lathe machine Harizon T300 brand that exists in the Laboratory of Maintenance and repair of Mechanical Engineering Department of State Polytechnic of Kupang; The results of this evaluation will serve as a reference in performing appropriate maintenance actions against the machine. The evaluation method and procedure used is based on standard test chart according to Schlesinger method. It was found that, from the 8 test components of Harizon T300 lathes, only two test components that still met the standards of geometric accuracy are: (1). Centre sleave for true running, and (2). Centre point for true running; While the other 6 components of testing have not met the required standards, namely: (1). The flatness of the bed, (2). Work spindle parallel with the bed in a vertical and horizontal plane, (3). Work spindle parallel with the bed in the vertical and horizontal plane, (4). the axis of centers parallel with the bed in the vertical plane, (5). Tailstock sleeve parallel with bed vertical and horizontal plane, and (6). Tailstock guide ways parallel with the movement of the carriage; Thus the conclusion of this research is the Harizon T300 lathes that used as a sample of this research was not standard anymore and needs to be reconditioned.
Authors and Affiliations
Frans Mangngi
Keywords
Related Articles
- EP ID EP669597
- DOI -
- Views 255
- Downloads 0
KAJI EKSPERIMENTAL PENGARUH BAFFLE PADA ALAT PENUKAR PANAS ALIRAN SEARAH DALAM UPAYA OPTIMASI SISTEM PENGERING
Heat exchangers or heat exchangers are tools used to change the temperature of the fluid or change the fluid phase by exchanging heat with another fluid. In a heat exchanger, the ability to exchange heat is largely deter...
PENINGKATAN PRODUKTIVITAS PERAWATAN SUMUR MELALUI FAKTOR-FAKTOR DOMINAN
In the upstream oil and gas industry, at plateau production period, well intervention activity is important to maintain the production level. In PT. Total E&P Indonesie, well intervention has contributed approximately 27...
PENDEKATAN KARAKTERISTIK RESPON GETARAN SISTEM 2 DOF SETELAH PENAMBAHAN INDEPENDENT DUAL TRANSLASIONAL DYNAMIC VIBRATION ABSORBER
Dual Translational dynamic vibration absorber (dDVA) is two DVA masses that can move in the translational direction and given into the system to reduce system-translation translational vibrations. The research about usin...
ANALISIS POTENSI REFUSE DERIVED FUEL (RDF) DARI SAMPAH PADA TEMPAT PEMBUANGAN AKHIR (TPA) DI KABUPATEN TEGAL SEBAGAI BAHAN BAKAR INCINERATOR PIROLISIS
The garbage dumping in Tegal Regency has reached 989.8 m3/day and increasing every year. The percentage of waste in Murareja landfill is dominated by plastic waste which is 40.15%. The plastic waste will be processed by...
PEMELIHARAAN MESIN DISC MILL SENTRA PETERNAKAN RAKYAT (SPR) CINAGARBOGO
Sentra Rakyat Rakyat (SPR) is a collection of cattle breeders in the Subang Regency area. SPR aims to raise beef cattle and provide ruminant feed. Ruminant feed made from corn hump waste. The disc mill machine is used in...