Evaluating Cramer-Rao Bound for 2D direction-finding via planar antenna arrays
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2016, Vol 0, Issue 67
Abstract
Evaluation of angular coordinates of radio sources is a major research interest and is mainly used for the separation of objectives. The configurations used by antenna arrays, which have been studied mainly concerned uniform linear, uniform rectangular, circular and uniform. The main advantage for the LAR-finding tasks is narrow main lobe of the directivity pattern, but scanning is only possible in the azimuth plane. In problems that require both azimuth and elevation direction finding planar AR was used. To date, the work devoted to a comparative study with superresolution direction finding performance, including estimates of the boundary of the Cramer-Rao, different configurations for the AP, touch often only one or two types of. Therefore, to obtain the optimal shape of the antenna array, which allows to obtain estimates of target coordinates with the highest accuracy is very important.
Authors and Affiliations
Yu. Nechaev, I. Peshkov
Keywords
Related Articles
- EP ID EP308250
- DOI 10.20535/RADAP.2016.67.12-17
- Views 49
- Downloads 0
Comparative analysis of potential characteristics of 2nd degree, 3d degree and 4th degree frequency modulated probing signals
Introduction. Complicated signals with the button ambiguity function can provide the distance and speed of target independent estimation. These include the signal with the 2nddegree that has been carefully researched ear...
The transformers of mechanical values on surface acoustic wave
Analyzed the structural scheme of transducers of mechanical quantities on the surface acoustic waves, we consider the scheme compensation converter mechanical values, discussed issues of improving the accuracy of measure...
The usage of regress model coefficient utilization of channels for creating the load distribution plan in network
Introduction. Method of problem solutions of management, design and quality evaluation using mathematical models coefficient utilization of channels (CUC) in standard form has several inconveniences. It is connected with...
Comparison of strategies of preventive and corrective maintenance of uninterruptible power supply
Introduction. The comparison of the reliability of two variants of the fault-tolerant N+M redundant configurations for uninterruptible power supply with corrective and preventive maintenance is given in this paper. Formu...
Modeling of Micromoving of Membrane Piezoquartz The Measuring converter
In work it is described piezoquartz the measuring converter of air pressure combines the use of two types of control: tensosensitivity of quartz resonator and management of it modulation of an interelectrode gap. Also th...