Evaluation of Absorption Coefficient of Biodegradable Composite Materials with Textile Inserts
Journal Title: Romanian Journal of Acoustics and Vibration - Year 2011, Vol 8, Issue 2
Abstract
The paper focuses on experimental evaluation of acoustic properties of biodegradable composite materials with textile inserts used in products with protective role in urban habitat. To determine the absorption and reflection coefficients, the samples made from biodegradable composites were tested by means of impedance tube Bruel&Kjaer type 4206 A, with frequency range between 100-3200 Hz. It was noted that the tested specimens show a high absorption coefficient for frequency range 800 – 2800 Hz. Based on experimental results, the composition of tested materials will be improved to obtain a good absorption of low frequencies.
Authors and Affiliations
Mariana Domnica STANCIU, Ioan CURTU, Camelia COSEREANU, Ovidiu VASILE, Cristina OLARESCU
Keywords
Related Articles
- EP ID EP98179
- DOI -
- Views 78
- Downloads 0
Determination of the Natural Frequencies of Beams Using Sound Pressure
This paper presents a method to determine the natural frequencies of transversal bending vibrations of beams and plates by means of time-history analysis. As excitation source the sound pressure produced by a speaker was...
Comparison between the NLMS and the NLMF Adaptation Algorithms Applied on Volterra Filters for Nonlinear Acoustic Echo Cancellation
A nonlinear acoustic echo cancellation setup using a third order Volterra filter is proposed in this article. The assorted types of nonlinearities encountered in the Loudspeaker-Enclosure-Microphone system are modelled b...
The Influences upon the Quality of the Mineral Aggregates Induced by Technological Vibrations During the Sorting Process
The paper present the results of dynamic analyses concerning the inertial vibratory sieve correlated with kinetic parameters with pits kinetic parameters in order to obtain an efficient sieving process of granularly mate...
Considerations Regarding the Influence of the Mechanical Vibrations Upon a Dynamic System Used in Tobacco Industry
The paper analyses, from the point of view of the mechanical vibrations, the apparatus of transporting and drying of tobacco leaves. The technical literature studies a reduced number of types of such apparatuses, which a...
Finite Element Analysis of thin plates clamped on the rim of different geometric forms. Part I: Simulating the Vibration Mode Shapes and Natural Frequencies
This paper comprises an introductive part, in which theoretic notions regarding plates and their classification are presented, as well as stating some national and international researches published regarding the study a...