Evaluation of Electrical and Mechanical Properties of Particulate Filled Natural Fiber Reinforced Vinyl ester Composites
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2014, Vol 2, Issue 12
Abstract
Globally natural fiber based structured polymer composite materials are emerging material of various disciplinary. In general the natural fiber composites are low cost, no health hazard, electrical insulation, good mechanical properties etc. The objectives of this present work, to investigate the suitability of natural fiber reinforced polymer composites using sisal fiber with alumina and coconut shell particulate. Initially the sisal fibers were soaked 4% of NaOH concentration about 3 hour to improve the interfacial bonding between fiber and matrix. The composite plates were fabricated by various concentration of alumina and coconut shell particulate. The plates were fabricated by compression molding technique. The electrical property of dielectric constant was calculated based on various concentrations of the alumina and coconut shell particulate composites. Finally fabricated composites were sized based on ASTM standards to discover the mechanical properties such as tensile and impact strength for commercialize this work.
Authors and Affiliations
P. Vijayakumar, Kalaiselvi
Survey Paper on Online Election System
An electronic voting (e-voting) system is a voting system in which the election data is recorded, stored and processed primarily as digital information. There are two types of election: On-Line and Offline. In online el...
Study and Comparison of Face Recognition based on PCA and 2DPCA
Face recognition is an integral part of biometrics and has been an active research field of application. The face is a major focus of attention in social life playing an important role in conveying a person’s identity a...
VR Based Monitoring System
we describe the design and development of hardware and software of a portable Virtual Reality in this research paper. The easy access of the device is achieved using a small credit-card sized, yet a powerful computer, R...
Design and Implementation of Microcontroller Based Motor Controller with Temperature Sensor
The objective of this project is to reduce the unwanted power used in electrical equipment’s for sensitive, less tolerant and power loss problems. This Project presents the design and simulation of a motor speed control...
Rudin-Osher-Fatemi (ROF) Model for Blurring Removal in Digital Images
The use of image is everywhere, from selfie to medical imaging. The quality of an image not only depends on camera type but also on the way it is captured. In real time applications quality of images, is not of that muc...