EVALUATION OF FATIGUE BEHAVIOR ON CARBON FIBER/EPOXY COMPOSITE LAMINATES AT ROOM TEMPERATURE
Journal Title: Jurnalul Stiintific TURBO - Year 2018, Vol 5, Issue 2
Abstract
Investigation of low-cycle fatigue of composites is of vital importance for the design of structural components. In this study, Low cycle fatigue behaviour of a CFR epoxy composite was investigated under sinusoidal wave loading at constant amplitude, a frequency of 8 Hz and stress ration R of 0.1. Furthermore, present study experimental results were ploted on S-N diagram and compared with relevant literature data, showing an incresed in fatigue resistance. It is found that the reinforcement architecture of the composite material has an important influence on the fatigue life performances, when two materials are tested in the same conditions. Likewise, it was found that an increase in apllied frequency can lead to lower fatigue life since energy dissipated in the laminate cause heating that can reach the glass transition temperature Tg, inducing structural degradation.
Authors and Affiliations
Raluca Maier
Keywords
Related Articles
- EP ID EP438568
- DOI -
- Views 127
- Downloads 0
HEAT TREATMENT INFLUENCE ON HARDNESS AND MICROSTRUCTURE OF ADAM MANUFACTURED 17-4 PH
The influence of heat treatment on the main characteristics of atomic diffusion additive manufactured 17-4 PH stainless steel was studied. Several investigations such as chemical micro-composition, porosity analysis, mic...
POWER CORRELATION OF DRIVING MOTOR FOR TURBO BLOWER WITH INDUSTRIAL PROCESS REQUIREMENTS
The turbo blowers are high-speed pneumatic bladed machines, great consumers of mechanical work. They are classified within the group of dynamic compressors, used for raising the pressure of gas. The turbo blower can be d...
Self-healing efficiency for fiber reinforced polymer composites
The paper presents a study on self-healing behaviour of fibre reinforced composite materials integrating dicyclopentadiene filled urea-formaldehyde microcapsules as healing system and Grubb’s catalyst as reaction catalys...
ADJUSTING THE RESONANT FREQUENCY OF A CANTILEVER PIEZOELECTRIC HARVESTER
The paper presents the methods employed for adjusting the resonant frequency of a piezoelectric harvester in cantilever construction, in order to meet the resonance condition with the vibration source. Operating at reson...
THE INFLUENCE OF NATURAL GAS COMPOSITION ON SCREW COMPRESSOR OIL
A comparative research regarding the influence of natural gas composition on screw compressor oil was carried out in order to establish the optimal maintenance program of COMOTI’s already installed screw compressors. Thu...