Evaluation of Hydraulic Resistance in Various Liquids and Temperature
Journal Title: Tribology in Industry - Year 2017, Vol 39, Issue 1
Abstract
This paper deals with a methodology for measuring and evaluating the static characteristics of control valves, with specifying a recommended measurement chain. This method enables measuring and evaluating the dependence of pressure drop on flow and flow coefficients depending on the type of fluid, temperature and viscosity also if the measurements were made at a different temperature and viscosity. This method extends of the possibility of using of these characteristics in the design work on hydraulic components in various areas of operation.
Authors and Affiliations
B Kopiláková, J. Turza, Ľ. Hujo
Study of Mechanical and Sliding Wear Behavior of Al-25Zn alloy/SiC/Graphite Novel Hybrid Composites for Plain Bearing Application
In this investigations, sliding wear performance of Al-25Zn based novel hybrid composites added with fixed weight percentage of graphite (3 wt.%) and varying weight percentage of silicon carbide (10, 20 and 30 wt.%) was...
A Review of Piston Compression Ring Tribology
This paper presents studies related to piston compression ring tribology and the theoretical and experimental works developed to analyze ring-liner contact friction. The literatures revealed that the simulation and exper...
Tribological Potencial of Zinc-Aluminium Alloys Improvement
In this paper are presented result of the study aimed at tribological improvement of ZA alloys. Two treatments of ZA-27 alloy were used: a) T4 heat treatment and b) reinforcement by graphite. The heat treatment of sample...
Flammability Tests on Hot Surface for Several Hydraulic Fluids
Industrial equipment using hydraulic fluids are design to accept higher load and speed, implicitly higher temperatures, including for fluids. Leakages from enclosures like gear boxes or hydraulic systems could increase t...
The Tribological Performance of Hardfaced/Thermal Sprayed Coatings for Increasing the Wear Resistance of Ventilation Mill Working Parts
During the coal pulverizing, the working parts of the ventilation mill are being worn by the sand particles. For this reason, the working parts are usually protected with materials resistant to wear (hardfaced/thermal sp...