Evaluation of Roughened Duct with Similar Wideness Gap of Arc with Staggered Link and Comparison with Similar Rib Roughness Geometries
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
This paper introduces new roughness used in roughened duct and evaluates the effective performance for wideness gap of arc with staggered link geometry. The present new roughness geometry has parameters like obstacle pitch of rib P'/P as 0.4, relative wideness of arc gap g/e as 3, ratio of arc stumble link to rib diameter (r/e) as 3 and arc angle (α) as 30o , gaps on either side of full arc as a number (Ng) of 3, rib pitch with respect to rib height (P/e) as 10 and dimensionless number of Reynolds (Re) as range of 3500 -14000. Turbulence geometries such as similar wideness gap of arc with staggered link, continuous arc rib, arc with gap rib and arc with a gap with obstacle element for rib pitch with respect to rib height (P/e) as 10 were tested. Highest factor of friction coefficient and Nusselt number is obtained to be 3.94 and 1.99 respectively for similar wideness of arc gap with stamble link. Evaluation of THP of similar wideness arc gap with stamble link roughness is higher than existing arc shaped rib element for all values of dimensionless Reynolds number with limit as 3000 to 14000.
Authors and Affiliations
Jaigopal Ambade, Dr. Atul Lanjewar
Keywords
Related Articles
- EP ID EP672314
- DOI 10.24247/ijmperdoct201990
- Views 95
- Downloads 0
EFFECT OF CUTTING SPEED ON GENERATION OF HEAT AT WORK-TOOL INTERFACE OF COPPER BASED SILVER AND BRASS ALLOYS
Copper and its alloys are extensively used in various electrical and other industrial applications, due to its high thermal and electrical conductivity. The machinability of copper depends on its alloying elements and it...
THE COMPARISON OF USED TEMPLE OIL BIODIESEL PRODUCTIVITIES WITH THE OTHER BIODIESEL
The present world is facing two serious problems, one global warming on account of environmental pollution and the other scarcity of fossil fuel. This has pointed to search alternative and sustainable energy sources whic...
Theoretical and Numerical Estimation of Sound Power from Out of Plane Modes of a Free Annular Circular Plate Having Parabolically Varying Thickness
In this study, the sound radiation characteristic of an annular circular plate with parabolically varying thickness with different taper ratios and different excitation locations are analysed.The mass of the plate is kep...
Controlling & Calibrating Vehicle-Related Issues using RFID Technology
This study explains how to control vehicle’s emission level and also how to keep traffic under control by using Radio Frequency Identification (RFID) technology. The RFID can also provide complete details about the vehic...
Experimental Investigation and Design Optimization of Face Milling Parameters on Monel K-500 by Doe Concept
K-Monel 500 is a precipitation hardenable, Nickel copper alloy with corrosion resistance. Typical applications for Monel K-500 include fasteners, springs, chain, pump, Impeller and Valve components due their excellent Me...