Evaluation of the efficiency of electrocoagulation process in removing cyanide, nitrate, turbidity, and chemical oxygen demand from landfill leachate
Journal Title: Environmental Health Engineering and Management Journal - Year 2021, Vol 8, Issue 3
Abstract
Background: Leachate contains toxic and non-biodegradable substances that are not easily treated by conventional treatment methods. This study investigated the effect of pH, current density, and reaction time parameters on the removal of cyanide (CN-), nitrate (NO3-), turbidity, and chemical oxygen demand (COD) from leachate by electrocoagulation process. Methods: This study was an experimental one with direct current using four parallel bipolar aluminum electrodes with 90% purity. The length, width, and thickness of the electrodes were 5 cm, 10 cm, and 2 mm, respectively. There were 6 holes with a diameter of 0.7 cm on each of the electrodes. The samples were prepared from the old leachate of solid waste landfill in Ghaemshahr, Iran. Results: In this study, at a current density of 33 mA/cm2 and a time of 60 minutes, the optimum removal efficiency of cyanide (100 %) was obtained at pH 5.5 and pH 10. Moreover, the maximum removal of nitrate (99.65 %) and turbidity (86.41 %) were at pH 5.5 and pH 8.3, respectively and the highest removal efficiency of COD (83.14 %) was obtained at pH 10. Conclusion: The results showed that the removal of cyanide, nitrate, turbidity, and COD increases with increasing current density and reaction time. Due to the proper removal of nitrate and cyanide from leachate by electrocoagulation, nitrate and cyanide amounts were less than the allowable contamination level. Based on the results, electrocoagulation is considered an efficient and effective method for removing nitrate and cyanide from old leachate of municipal solid wastes.
Authors and Affiliations
Abdoliman Amouei, Mehdi Pouramir, Hosseinali Asgharnia, Mahmoud Mehdinia, Mohammad Shirmardi, Hourieh Fallah, Asieh Khalilpour, Hajar Tabarinia
Keywords
Related Articles
- EP ID EP696925
- DOI 10.34172/EHEM.2021.27
- Views 116
- Downloads 0
Distribution and risk assessment of toxic metal pollution in the soil and sediment around the copper mine
Background: Industrial pollution of metals is a serious environmental concern. The presence of Sarcheshmeh copper (Cu) mine and the possibility of soil pollution, were the primary motivations for evaluating heavy metal...
Chromium removal and water recycling from electroplating wastewater through direct osmosis: Modeling and optimization by response surface methodology
Background: Considering the carcinogenic effects of heavy metals, such as chromium, it is essential to remove these elements from water and wastewater. Direct osmosis is a new membrane technology, which can be a proper...
Activation of persulfate by TiO2-Fe3O4 nanocomposite for reactive red 198 degradation along with modeling and optimization approach
Background: Recently, sulfate radical-based photocatalytic processes have attracted significant interests because of unique advantages in pollutants purification. In this study, TiO2-Fe3O4 nanocomposites in the presenc...
Neglect of other health services during the corona crisis
This article does not have abstract
Assessment of toxicity and kinetic effects of erythromycin on activated sludge consortium by fast respirometry method
Background: The present study aimed to assess the acute impact of erythromycin (ERY) as an inhibitor on peptone mixture utilization of activated sludge (AS) consortium. Methods: For this purpose, the inhibition of oxyg...