Evaluation of the quality of cyanoacrylate adhesive joints using the example of poly(methyl methacrylate) and polycarbonate
Journal Title: Production Engineering Archives - Year 2017, Vol 0, Issue
Abstract
Adhesive bonding is one of the simplest and most common methods used for joining materials. It is applied in both production and repair works. The most commonly used adhesives are cyanoacrylates, due to the possibility of combining various materials and short curing time. One of the ways to as-sess the quality of the adhesive used is testing the shear strength of bonded joints. Three adhesives commonly available on the Polish market, from various manufacturers and with different prices per gram of product were tested. The polymer materials bonded were poly(methyl methacrylate) and polycabonate, since they are broadly used in the automotive industry and household equipment. The study revealed significant differences in bonding strength, reaching as much as 38% The adhesive’s price was not commensurate with the quality of the product tested in all cases.
Authors and Affiliations
Piotr Mazur
Keywords
Related Articles
- EP ID EP261128
- DOI -
- Views 77
- Downloads 0
Influence of antimony modification and heat treatment on the AlSi9CuMnNi alloy
Modification of alloys is an important part of the metallurgical process, and this also applies to aluminum alloys, particularly for Al-Si (silumins). As a modification of the material we can utilise the modification usi...
IMPROVING PRODUCTION OF LOW PRESSURE HOSES
The paper presents the results of research carried out in one of the domestic companies producing rubber and plastics products for the automotive industry. The results of the evaluation of the quality control function du...
Evaluation of service conditions of the machines within the furniture joinery
The aim of this thesis is to present the operation of machines within the furniture joinery, presentation of the risks for this branch, discussion of quality and technical documentation within the analysed enterprise, ch...
Use of statistical acceptance of products in the automotive industry
The article presents the results of studies on the implementation of statistical acceptance of products with the example of a styrene-rubber plastic connector, while considering particular stages of production. The chara...
The dynamic state monitoring of bearings system
The article discusses the methods of dynamic state monitoring of bearings system. A vibration signal contains important technical information about the machine condition and is currently the most frequently used in diagn...